Hi ! Thanks alot for your quick reply ! It seems to be the same for all the channels.
-Brian --- On Tue, 1/6/09, Ike Zimbel <[email protected]> wrote: > From: Ike Zimbel <[email protected]> > Subject: Re: NEOTEK: problem with my Neotek Elan II > To: [email protected] > Date: Tuesday, January 6, 2009, 2:33 PM > Hi Brian, > Is this on a per channel basis, or right across the > board? If it is > individual channels, it is probably a bad solder joint on > the pan pot. > This is really common on the Elite and may also happen on > the Elan. > best, > Ike > > Brian Simmons wrote: > > I bought a Neotek Elan II about 3 years ago and have > run into a problem with my Aux A/B section. When I pan the > individual channel Aux A/B to the right I get a full sinal > out of "B" but if I pan to the left , I get a very > low level signal that sounds a bit distorted out of > "A". When I solo the master send for "A" > its the same low level distorted signal. > > I have very little experience in electronics so any > help would be greatly appreciated. > > > > thanks > > -Brian > > > > > > > > > > > > > > ------ > > > > You can unsubscribe at anytime by sending an email to > mailto:[email protected] with "unsubscribe > neotek" in the message body. If you have any > difficulties, or questions --please send an email to > [email protected]. > > > > The Neotek list is lovingly hosted by Catapult Web > Development. Remember that any message or reply sent to the > list will be automatically forwarded to all subscribers. > > Vive Le Neotek ! > > > > Thanks. > > > > > > -- > Ike Zimbel > Zimbel Audio Productions Ltd. > Toronto > 416-720-0887 > "Studio House Calls" - Repairs and upgrades to > analog audio equipment including: Amek, Allen & Heath, > Neve, Neotek, MCI, Soundcraft and more. > > > ------ > > You can unsubscribe at anytime by sending an email to > mailto:[email protected] with "unsubscribe > neotek" in the message body. If you have any > difficulties, or questions --please send an email to > [email protected]. > > The Neotek list is lovingly hosted by Catapult Web > Development. Remember that any message or reply sent to the > list will be automatically forwarded to all subscribers. > Vive Le Neotek ! > > Thanks. ------ You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to [email protected]. The Neotek list is lovingly hosted by Catapult Web Development. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek ! Thanks.
