Sorry I had no idea you were talking about a mackie. I totally thought you were talking about a neotek. Either way good luck.
Sent from my iPhone On Jul 28, 2011, at 10:19 PM, Ike <[email protected]> wrote: Hi Steve, Good plan, for a Neotek. Unfortunately not an option with the Mackie under discussion as the faders are mounted on the circuit board. That said, I have some new P&G 3000 series 10k faders going for cheap if anyone wants to do what Steve did with their Neotek. Best Ike Ike Zimbel Zimbel Audio Ltd 416-720-0887 www.zimbelaudio.com Sent from my iPhone On 2011-07-28, at 11:06 PM, Steve Antoniazzi <[email protected]> wrote: Just jumping in here I didn't read all of what's going on. Here's my experience I had the original duncan faders In my 24x8 series 1e. I replaced them with P&G and have noticed a great deal of response. The glide ratio is much better and the faders are obviously much smoother. The caps are a little fatter which I like better. If you have the money it's a definate upgrade. I remember that swapping them out is a very simple 3 pin molex connector. Also having the board be modular in my mind is the first hill to go up with out being modular it's really really difficult. Either way what ever the time and money these boards are well worth it. Good luck! ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
