Hi
Unless you use gold plated Molexes you are far better off soldering
them. You won't save any significant time and it will cost putting the
Molexes onto the board.
Just something else to go wrong basically!
Matt S
On 31/07/2011 01:42, Steve Antoniazzi wrote:
Before just soldering straight to the pc board solder on a molex connector so
if you run into issues in the future you can just snap a new fader in. Three
little wires to the molex connector same thing from the fader.
Sent from my iPhone
On Jul 28, 2011, at 10:27 PM, Jack Dean Stauss<[email protected]> wrote:
I just got some NOS duncans for my series 1...would the p&g's be an improvement
worth the soldering time?
Jack
Sent from my iPhone
On Jul 28, 2011, at 8:19 PM, Ike<[email protected]> wrote:
Hi Steve,
Good plan, for a Neotek. Unfortunately not an option with the Mackie under
discussion as the faders are mounted on the circuit board.
That said, I have some new P&G 3000 series 10k faders going for cheap if
anyone wants to do what Steve did with their Neotek.
Best
Ike
Ike Zimbel
Zimbel Audio Ltd
416-720-0887
www.zimbelaudio.com
Sent from my iPhone
On 2011-07-28, at 11:06 PM, Steve Antoniazzi<[email protected]> wrote:
Just jumping in here I didn't read all of what's going on. Here's my experience I
had the original duncan faders In my 24x8 series 1e. I replaced them with P&G
and have noticed a great deal of response. The glide ratio is much better and the
faders are obviously much smoother. The caps are a little fatter which I like
better. If you have the money it's a definate upgrade. I remember that swapping
them out is a very simple 3 pin molex connector. Also having the board be modular
in my mind is the first hill to go up with out being modular it's really really
difficult. Either way what ever the time and money these boards are well worth it.
Good luck!
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
