In addition to cleaning, you may also need to null out the dc across
the pot. This dc varies as the gain pot is rotated causing noise. On
the Series 1 there is a trimpot for this, I assume the Elite is
similar, but I don't have a schematic.
Jim Mikles
On 11/3/2011 8:35 PM, Andrew Nast wrote:
We have a Neotek Elite we recently installed, and every mic pre pot is
super scratchy. I did some quick research, and bought two products;
Deoxit Fader F5, and Deoxit Gold G5. Should I use both, or one of
these products? Any tips on this procedure? I figure I need to pull
each module and spray it in from the underneath. Going to wait for
someones 2 cents before proceeding. Thanks in advance!!
Andrew
The Decibel Garden
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
