Might want to do the DC thing and exercise each pot vigorously before deciding to use cleaner.
Casey On 04/11/2011, at 11:54 AM, Jim Mikles wrote: > In addition to cleaning, you may also need to null out the dc across the > pot. This dc varies as the gain pot is rotated causing noise. On the Series > 1 there is a trimpot for this, I assume the Elite is similar, but I don't > have a schematic. > Jim Mikles > > On 11/3/2011 8:35 PM, Andrew Nast wrote: >> We have a Neotek Elite we recently installed, and every mic pre pot is super >> scratchy. I did some quick research, and bought two products; Deoxit Fader >> F5, and Deoxit Gold G5. Should I use both, or one of these products? Any >> tips on this procedure? I figure I need to pull each module and spray it in >> from the underneath. Going to wait for someones 2 cents before proceeding. >> Thanks in advance!! >> >> Andrew >> The Decibel Garden > ------ > > View the list online at: http://www.mail-archive.com/[email protected] > > You can unsubscribe at anytime by sending an email to > mailto:[email protected] with "unsubscribe neotek" in the message body. > If you have any difficulties, or questions --please send an email to > mailto:[email protected]. > > The Neotek list is lovingly hosted by Catapult Web. Remember that any message > or reply sent to the list will be automatically forwarded to all subscribers. > > Vive Le Neotek! > > Thanks. Casey Rice PO Box 423 Yarraville VIC 3013 +61 4 2367 2340
