Did my last post go through? Greg Norman On Nov 3, 2011, at 8:15 PM, Casey Rice wrote:
> Might want to do the DC thing and exercise each pot vigorously before > deciding to use cleaner. > > Casey > > > On 04/11/2011, at 11:54 AM, Jim Mikles wrote: > >> In addition to cleaning, you may also need to null out the dc across the >> pot. This dc varies as the gain pot is rotated causing noise. On the >> Series 1 there is a trimpot for this, I assume the Elite is similar, but I >> don't have a schematic. >> Jim Mikles >> >> On 11/3/2011 8:35 PM, Andrew Nast wrote: >>> We have a Neotek Elite we recently installed, and every mic pre pot is >>> super scratchy. I did some quick research, and bought two products; Deoxit >>> Fader F5, and Deoxit Gold G5. Should I use both, or one of these products? >>> Any tips on this procedure? I figure I need to pull each module and spray >>> it in from the underneath. Going to wait for someones 2 cents before >>> proceeding. Thanks in advance!! >>> >>> Andrew >>> The Decibel Garden >> ------ >> >> View the list online at: http://www.mail-archive.com/[email protected] >> >> You can unsubscribe at anytime by sending an email to >> mailto:[email protected] with "unsubscribe neotek" in the message >> body. If you have any difficulties, or questions --please send an email to >> mailto:[email protected]. >> >> The Neotek list is lovingly hosted by Catapult Web. Remember that any >> message or reply sent to the list will be automatically forwarded to all >> subscribers. >> >> Vive Le Neotek! >> >> Thanks. > > Casey Rice > PO Box 423 > Yarraville VIC 3013 > +61 4 2367 2340 >
