Do you have a manual with the power supply schematic and (more
importantly) parts layout? Also, how many channels is your console and
how many power supplies do you have?
best,
Ike
On 11-11-03 11:36 PM, Andrew Nast wrote:
Thanks for all of the help! I've only replaced fuses on the power
supply, how do you go about trimming the 18v rail? I'm going to look
at my schematics in the morning to see about the DC action.
On Nov 3, 2011, at 9:12 PM, "os" <[email protected]
<mailto:[email protected]>> wrote:
yes
-----Original Message-----
*From:* [email protected]
<mailto:[email protected]>
[mailto:[email protected]
<mailto:[email protected]>]*On Behalf Of *Greg Norman
*Sent:* Thursday, November 03, 2011 11:05 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: NEOTEK: Cleaning Pots on Neotek Elite
Did my last post go through?
Greg Norman
On Nov 3, 2011, at 8:15 PM, Casey Rice wrote:
Might want to do the DC thing and exercise each pot vigorously
before deciding to use cleaner.
Casey
On 04/11/2011, at 11:54 AM, Jim Mikles wrote:
In addition to cleaning, you may also need to null out the dc
across the pot. This dc varies as the gain pot is rotated
causing noise. On the Series 1 there is a trimpot for this, I
assume the Elite is similar, but I don't have a schematic.
Jim Mikles
On 11/3/2011 8:35 PM, Andrew Nast wrote:
We have a Neotek Elite we recently installed, and every mic
pre pot is super scratchy. I did some quick research, and
bought two products; Deoxit Fader F5, and Deoxit Gold G5.
Should I use both, or one of these products? Any tips on this
procedure? I figure I need to pull each module and spray it in
from the underneath. Going to wait for someones 2 cents before
proceeding. Thanks in advance!!
Andrew
The Decibel Garden
------
View the list online at:
http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] with "unsubscribe neotek" in the
message body. If you have any difficulties, or questions
--please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember
that any message or reply sent to the list will be
automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
Casey Rice
PO Box 423
Yarraville VIC 3013
+61 4 2367 2340
--
Ike Zimbel,
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls". Repairs and upgrades to analog audio equipment including:
AMEK, dbx, Neve, Neotek, MCI, Soundcraft and more. Authorized Warranty service for Allen&
Heath, Clear-Com, Drawmer, Soundcraft, SPL and Yamaha. Ask about our RF frequency
co-ordination services!
www.zimbelaudio.com
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
