Dave - I was missing the paths to the configure command.
The configure seemed to go through without any issues. I did have some
problems with the compile though:
mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:
In function `jtrsMdlNeighborNodeTable_container_load':
mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:302:
error: `jtrsMdlCapacity' undeclared (first use in this function)
mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:302:
error: (Each undeclared identifier is reported only once
mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:302:
error: for each function it appears in.)
mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:309:
error: `jtrsMdlThroughput' undeclared (first use in this function)
mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:316:
error: `jtrsMdlLinkQuality' undeclared (first use in this
function)mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:323:
error: `jtrsMdlSiSRateIndex' undeclared (first use in this
function)mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:330:
error: `jtrsMdlXmitPowerLevel' undeclared (first use in this function)
mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:337:
error: `jtrsMdlCoSited' undeclared (first use in this function)
mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:345:
error: `jtrsMdlCorrectReceptions' undeclared (first use in this function)
mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.c:352:
error: `jtrsMdlTransmissions' undeclared (first use in this function)make[1]:
***
[mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_data_access.lo]
Error 1
m
I'll review the #includes as you mentioned.
I trying to develop a client to perform gets. The reason I'm extending the
agent is so that I can test with the customer MIBs (I don't have easy access to
the customer hardware). Really, I just need to be able to perform gets/sets on
the table values to support testing.
Is the MfD the best config to use for this? Is there a simpler config that
isn't so "deep" that would do what I need? As I said, my main app will be the
client doing the gets, not the agent.
Thanks for the help,
Mark
-----Original Message-----
From: [EMAIL PROTECTED] on behalf of Dave Shield
Sent: Wed 5/9/2007 1:51 PM
To: Mark Riehl
Cc: [email protected]
Subject: Re: Extending an Agent
On 09/05/07, Mark Riehl <[EMAIL PROTECTED]> wrote:
> (Why does it generate all of the *~ files?)
That's the result of running "indent" on the code.
> I'm confused about where the files need to go.
> configure: error: mib module "jtrsMdlNeighborNodeTable" requires module
> "JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_interface"
The MfD framework seems to require a relatively "deep" structure,
as compared to most of the others, which are typically a single pair
of code files and can (in principle) be placed anywhere.
(Though the #includes might need to be tweaked).
That's the result of running "indent" on the code.
> I'm confused about where the files need to go.
> configure: error: mib module "jtrsMdlNeighborNodeTable" requires module
> "JTRS-MDL-MIB/jtrsMdlNeighborNodeTable/jtrsMdlNeighborNodeTable_interface"
The MfD framework seems to require a relatively "deep" structure,
as compared to most of the others, which are typically a single pair
of code files and can (in principle) be placed anywhere.
(Though the #includes might need to be tweaked).
> From this error, it looks like I need to create the directory path:
> agent/mibgroup/JTRS-MDL-MIB/jtrsMdlNeighborTable and put
> the file in there.
Yes.
> But, which files go here?
All of them.
Then run
./configure
--with-mib-modules="JTRS-MDL-MIB/jtrsMdlNeighborTable/jtrsMdlNeighborNodeTable"
What happens then?
Dave
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
