I appreciate your attention on this. a) the output into snmpd.conf is from net-snmp-config, it looks the same as it did for 5.2.3. net-snmp-config reports v5.2.4 b) I'll try your suggestions but I do not link in the UCD mibs, I posted the net-snmp-config output to Thomas, here it is host/hr_system mibII/system_mib util_funcs mibII/vacm_conf mibII/vacm_context mibII/vacm_vars snmpv3/usmConf snmpv3/usmStats snmpv3/usmUser snmpv3/snmpEngine utilities/override utilities/execute
I am starting the agent as: ./snmpd -Le -f I actually execute it from within /usr/local/sbin, there is no difference when specifying the full path. Thanks, Adam -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Shield Sent: Wednesday, January 30, 2008 10:22 AM To: Bell, Adam Cc: net-snmp-users@lists.sourceforge.net Subject: Re: upgrading from 5.2.3 to 5.2.4 On 30/01/2008, Bell, Adam <[EMAIL PROTECTED]> wrote: > I still see /var/net-snmp/snmpd.conf: Line 34: > Warning: Unknown token: createUser > > What else should I be looking at? Two basic possibilities spring to mind: a) There's a typo or similar in the snmpd.conf file b) There's something wrong with the snmpd binary The simplest way to test the first option is probably to copy the snmpd.conf file onto some other system, and run a default version of the agent (e.g. a vendor-supplied binary) against it. If that's happy, then you can safely concentrate on your new binary. Thomas has suggested running "net-snmp-config" to check the options used to compile it. I'd also suggest querying the value of UCD-SNMP-MIB::versionConfigureOptions.0 Make sure that this does match what you expect. It might also be worth starting again with a fresh install. Remove the old agent (and client) binaries, together with *any* SNMP-related libraries - make sure there's no trace of Net--SNMP on your system at all. Then take a clean source tarball, and run configure/make/make install as before. One final thought - how exactly are you starting up the agent? Does it make any difference if you specify a full path to the agent binary? Dave The information contained in this electronic mail transmission may be privileged and confidential, and therefore, protected from disclosure. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer without copying or disclosing it. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
