List,
        
Below is an alias of the command I used in an attempt to burn the mdk
9.2 install cd iso. When I used mkcd on previous attempts to burn an iso
to discs of questionable quality I got the error at the bottom as well.
Question: What caused the failure? If it needs to use overburn, I looked
at the cdrecord man page, but I didn't see a note on overburn; is that
part of the driveropts or a separate 'dashed' CL parameter? Or.. Is it
somehow related to the buffer being full 10704 times?

Thanks,

Terry

My new sig:

IIRC CRS 

alias biso='cdrecord -v -eject driveropts=burnfree speed=4 dev=0,0,0
-dao'

[EMAIL PROTECTED] ISOs]$ biso Mandrake92-cd1-inst.i586.iso
Cdrecord 2.0 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'PLEXTOR '
Identifikation : 'CD-R   PX-W1210A'
Revision       : '1.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Drive buf size : 1190112 = 1162 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   651 MB
Total size:      748 MB (74:10.80) = 333810 sectors
Lout start:      749 MB (74:12/60) = 333810 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 26036
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:  651 of  651 MB written (fifo 100%) [buf  94%]   4.1x.
Track 01: Total bytes read/written: 683642880/683642880 (333810
sectors).
Writing  time: 1176.565s
Average write speed   3.8x.
Min drive buffer fill was 94%
Fixating...
Fixating time:    2.803s
cdrecord: fifo had 10769 puts and 10769 gets.
cdrecord: fifo was 0 times empty and 10704 times full, min fill was 98%.

[EMAIL PROTECTED] ISOs]$ ls -la /mnt/cdrom
total 0

[EMAIL PROTECTED] ISOs]$ mkcd --checkdisc /dev/scd0 9.2-download.md5sums.asc
mkcd:
mkcd: Checking the disc
 
FAILED (computed d41d8cd98f00b204e9800998ecf8427e <> expected )
ERROR: Checking the disc

[EMAIL PROTECTED] ISOs]$



Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to