got any numbers on the modem? On Monday 17 December 2001 21:31, you wrote: > Thanks Charles, Ed, & DarkLord :-)) > > I had gone to the Diamond site before posting this to the list. I checked > again including the PDF manual but no jumper settings to be found. Have > emailed them twice now but am still waiting but not holding my breath. > Would probably turn blue and keel over. > > Did a search on Google as well but to no avail. > > There are six pairs of pins (0-5) with pairs (1-5) shorted out by jumpers. > Anyone have any suggestions so that my modem does not get uninstalled? > > TIA > > Frank McKenna > > Difficulties increase the closer we approach our Goals > > Plato ~ "It takes a minute to have a crush on > someone,an hour to like someone and a day to love > someone....but it takes a lifetime to forget someone." > > ----- Original Message ----- > From: "Charles A Edwards" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, December 16, 2001 8:05 AM > Subject: Re: [newbie] Modem causes mouse to be unistalled > > > On Sun, 16 Dec 2001 09:45:51 -0500 > > > > Ed Tharp <[EMAIL PROTECTED]> wrote: > > > turn OFF plug and pray aware OS in bios, yes that is the first thing. > > how did > > > > you do it? reserve (also in Bios , isa-pnp) an IRQ for the ISA slot > > > slot > > the > > > > modem is in. you might also have to see if there is a setup utility to > > set > > > > the modems IRQ (probly dos based) or if this modem has jumpers or dip > > > switches. > > > > > > On Sunday 16 December 2001 01:51, you wrote: > > > > Hi All, > > > > > > > > I want to desperately get my Linux box online but my modem causes my > > mouse > > > > > to uninstall and I currently cannot navigate that well in command > > prompt > > > > > mode. > > > > > > > > My latest acquisition is a 1998 Diamond System Multimedia > > Communications > > > > > Division 56 K ISA internal modem > > > > > > > > Maybe someone will be able to tell me how to stop my mouse from being > > > > uninstalled when I insert my modem. > > > > > > > > I think that I have turned off PnP if that is the first thing that > > anyone > > > > > is going to suggest. > > > > You are going to have to chage the jumpers on the modem for com port. > > Right now it is set to use the same port that your mouse is on, this is > > why > > > you loose the mouse. > > Your ISA moden will have anywhere from 1 to 3 jumoers, allowin you to > > manually > > > set the com port, IRQ and I/O address. > > If you do not have the docs for the modem then check the Diamond site. > > > > > > Charles > > --------------------------------------------------------------------------- >- ---- > > > Want to buy your Pack or Services from MandrakeSoft? > > Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com