Can I have a number? On Mar 11, 2009, at 10:40 AM, Kyle Munz wrote:
> Then I want to change my number too... > > -Kyle #138 > > On Wed, Mar 11, 2009 at 10:30 AM, Kyle K.K. <not.chr...@gmail.com> > wrote: > > Well, maybe I can con a friend of mine into fabbing up some > stainless panels.... > > Because I don't like being Kyle #2 > -Kyle #13 > > On Wed, Mar 11, 2009 at 9:23 AM, Kyle Munz <kyle...@gmail.com> wrote: > > I just noticed that this conversation now has two Kyles and Two > Grahams, now > > all we need is one more hotrodmamma > > > > -Kyle #1 > > > > On Wed, Mar 11, 2009 at 10:16 AM, Graham Rogers > <graha...@ptd.net> wrote: > >> > >> Why don't you try air side panels Kyle - they never need > cleaning, it's > >> easy to see what's behind them and they don't need attaching, > Graham > >> On Mar 11, 2009, at 9:27 AM, Kyle Munz wrote: > >> > >> I'm going to make new side panels out of paper mache, I'll let > you know > >> how that goes... > >> > >> -Kyle > >> > >> > >> On Wed, Mar 11, 2009 at 9:24 AM, Creative Residential Designs > >> <finderskeep...@qwest.net> wrote: > >>> > >>> Yes, but in this case the 550 panel is substantially smaller > that a 650 > >>> panel. I envision hacking the thing in two both directions and > then > >>> re-studding it too....hmm. An experiment that I will wait for > the results > >>> on. > >>> (P.S...I have both a 550 and a 650 in my shop. I would be > willing to > >>> measure > >>> the 550 panel for our friend here and maybe he can manufacture > one.) > >>> Hotrod. > >>> > >>> ----- Original Message ----- > >>> From: <cakra...@gmail.com> > >>> To: "Nighthawk Motorcycle Lovers!" > <nighthawk_lovers@googlegroups.com> > >>> Sent: Wednesday, March 11, 2009 3:36 AM > >>> Subject: [Nighthawk Lovers] Re: Body panel question > >>> > >>> > >>> > >>> I would like to add to this that I had some success repairing > one of > >>> the plastic mounting studs on the inside of my '86 CB700SC. The > >>> rearward stud on the left side busted from... stuff, and i lost > the > >>> piece too. I waited it out for the OE rubber grommet piece to > come in > >>> the mail. I went to Motorcycles Unlimited, in Stanton, CA and > found a > >>> similar, but longer stud off an old Yamaha I think. I stuck > the hack- > >>> job together using some bent welding rod for support, and > Permatex 2- > >>> part plastic weld epoxy and my Dremmel for a custom fit. The > grommet > >>> was like two or three dollars and I had the other stuff so this > >>> repair, although time consuming, is super low cost. For > alteration of > >>> body panels... good luck hotrod.. > >>> > >>> On Mar 10, 10:10 pm, "Creative Residential Designs" > >>> <finderskeep...@qwest.net> wrote: > >>> > No can do partner. It's PLASTIC. You can go pound one out of > sheet > >>> > metal > >>> > and > >>> > weld some tabs on. Get out your calculator and ruler..Hotrod. > >>> > > >>> > ----- Original Message ----- > >>> > From: "Kyle K.K." <not.chr...@gmail.com> > >>> > To: <nighthawk_lovers@googlegroups.com> > >>> > Sent: Tuesday, March 10, 2009 10:54 PM > >>> > Subject: [Nighthawk Lovers] Re: Body panel question > >>> > > >>> > > I'd be willing to modify the body panel. I'm just tired of > my right > >>> > > side panel almost falling off. > >>> > > >>> > > On Tue, Mar 10, 2009 at 10:25 PM, Dennis Hammerl > <blues...@yahoo.com> > >>> > > wrote: > >>> > >> Why don't you check an on-line Honda parts look-up and see > if both > >>> > >> parts > >>> > >> have the same number ? (hint... they don't) > >>> > > >>> > >> --- On Tue, 3/10/09, Kyle K.K. <not.chr...@gmail.com> wrote: > >>> > > >>> > >> From: Kyle K.K. <not.chr...@gmail.com> > >>> > >> Subject: [Nighthawk Lovers] Body panel question > >>> > >> To: nighthawk_lovers@googlegroups.com > >>> > >> Date: Tuesday, March 10, 2009, 9:28 AM > >>> > > >>> > >> Anyone know if a right hand side 650 side panel will work > (with > >>> > >> modification if need be) on an '83 550? > >>> > > >>> > >> -Kyle > >>> > >>> > >>> > >>> > >>> > >> > >> > >> > >> > >> > >> > >> > > > > > > > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to nighthawk_lovers@googlegroups.com To unsubscribe from this group, send email to nighthawk_lovers+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---