NO SOUP FOR YOU! On Wed, Mar 11, 2009 at 10:43 AM, Graham Rogers <graha...@ptd.net> wrote:
> Can I have a number? > > On Mar 11, 2009, at 10:40 AM, Kyle Munz wrote: > > Then I want to change my number too... > > -Kyle #138 > > On Wed, Mar 11, 2009 at 10:30 AM, Kyle K.K. <not.chr...@gmail.com> wrote: > >> >> Well, maybe I can con a friend of mine into fabbing up some stainless >> panels.... >> >> Because I don't like being Kyle #2 >> -Kyle #13 >> >> On Wed, Mar 11, 2009 at 9:23 AM, Kyle Munz <kyle...@gmail.com> wrote: >> > I just noticed that this conversation now has two Kyles and Two Grahams, >> now >> > all we need is one more hotrodmamma >> > >> > -Kyle #1 >> > >> > On Wed, Mar 11, 2009 at 10:16 AM, Graham Rogers <graha...@ptd.net> >> wrote: >> >> >> >> Why don't you try air side panels Kyle - they never need cleaning, it's >> >> easy to see what's behind them and they don't need attaching, Graham >> >> On Mar 11, 2009, at 9:27 AM, Kyle Munz wrote: >> >> >> >> I'm going to make new side panels out of paper mache, I'll let you know >> >> how that goes... >> >> >> >> -Kyle >> >> >> >> >> >> On Wed, Mar 11, 2009 at 9:24 AM, Creative Residential Designs >> >> <finderskeep...@qwest.net> wrote: >> >>> >> >>> Yes, but in this case the 550 panel is substantially smaller that a >> 650 >> >>> panel. I envision hacking the thing in two both directions and then >> >>> re-studding it too....hmm. An experiment that I will wait for the >> results >> >>> on. >> >>> (P.S...I have both a 550 and a 650 in my shop. I would be willing to >> >>> measure >> >>> the 550 panel for our friend here and maybe he can manufacture one.) >> >>> Hotrod. >> >>> >> >>> ----- Original Message ----- >> >>> From: <cakra...@gmail.com> >> >>> To: "Nighthawk Motorcycle Lovers!" <nighthawk_lovers@googlegroups.com >> > >> >>> Sent: Wednesday, March 11, 2009 3:36 AM >> >>> Subject: [Nighthawk Lovers] Re: Body panel question >> >>> >> >>> >> >>> >> >>> I would like to add to this that I had some success repairing one of >> >>> the plastic mounting studs on the inside of my '86 CB700SC. The >> >>> rearward stud on the left side busted from... stuff, and i lost the >> >>> piece too. I waited it out for the OE rubber grommet piece to come in >> >>> the mail. I went to Motorcycles Unlimited, in Stanton, CA and found a >> >>> similar, but longer stud off an old Yamaha I think. I stuck the hack- >> >>> job together using some bent welding rod for support, and Permatex 2- >> >>> part plastic weld epoxy and my Dremmel for a custom fit. The grommet >> >>> was like two or three dollars and I had the other stuff so this >> >>> repair, although time consuming, is super low cost. For alteration of >> >>> body panels... good luck hotrod.. >> >>> >> >>> On Mar 10, 10:10 pm, "Creative Residential Designs" >> >>> <finderskeep...@qwest.net> wrote: >> >>> > No can do partner. It's PLASTIC. You can go pound one out of sheet >> >>> > metal >> >>> > and >> >>> > weld some tabs on. Get out your calculator and ruler..Hotrod. >> >>> > >> >>> > ----- Original Message ----- >> >>> > From: "Kyle K.K." <not.chr...@gmail.com> >> >>> > To: <nighthawk_lovers@googlegroups.com> >> >>> > Sent: Tuesday, March 10, 2009 10:54 PM >> >>> > Subject: [Nighthawk Lovers] Re: Body panel question >> >>> > >> >>> > > I'd be willing to modify the body panel. I'm just tired of my >> right >> >>> > > side panel almost falling off. >> >>> > >> >>> > > On Tue, Mar 10, 2009 at 10:25 PM, Dennis Hammerl < >> blues...@yahoo.com> >> >>> > > wrote: >> >>> > >> Why don't you check an on-line Honda parts look-up and see if >> both >> >>> > >> parts >> >>> > >> have the same number ? (hint... they don't) >> >>> > >> >>> > >> --- On Tue, 3/10/09, Kyle K.K. <not.chr...@gmail.com> wrote: >> >>> > >> >>> > >> From: Kyle K.K. <not.chr...@gmail.com> >> >>> > >> Subject: [Nighthawk Lovers] Body panel question >> >>> > >> To: nighthawk_lovers@googlegroups.com >> >>> > >> Date: Tuesday, March 10, 2009, 9:28 AM >> >>> > >> >>> > >> Anyone know if a right hand side 650 side panel will work (with >> >>> > >> modification if need be) on an '83 550? >> >>> > >> >>> > >> -Kyle >> >>> >> >>> >> >>> >> >>> >> >>> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > >> > >> > > >> > >> >> >> > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to nighthawk_lovers@googlegroups.com To unsubscribe from this group, send email to nighthawk_lovers+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
