Hi All,

Well my 83 650 with 43K miles is rattling like a paint can at 2800 to
3300 rpm so it's time to deal with the automatic cam chain tensioner
(or lack there of).

I've studied all that the Honda OEM manual has to offer on this
mechanism - so I know the pricipals by which it works but not any
inspection criteria.

I pulled the valve cover and this what i find:

1) No marks on the valve cover chain guard.
2) The cam chain was taught between the cam gears - I could push it
1/8" (total range of motion) when applying ~ 5 lbs downward and upward
to the chain in between the gears, and the chain would retain whatever
tension it had.
3) I pushed on the chain (same as in (3) above) with about 20 lbs and
then it went slack with about 1/4" total range of motion up and down.
I turned the engine 1/4 crank or so with the back wheel and the chain
went back to the original tension as in (2)
4) The spring is connected to the mechanism (taught)

That's about all I've observed at this stage.

My question is: I
Is there a definate way to diagnose the health of the tensioning
system?
Would the chain behaviour in (2) and (3) above be expected for a
tensioner in good shape?
Is there anything else i should inspect now before removal of the
cams)
How should a healthy tensioner behave during inspection?

I was actually hoping I would find the tensioner arm magically
"unstick" if i wiggled it but that may be a bit of a optimistic dream
- right!

Thanks for any suggestions you have.

Paul


--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to