I didn't have my bike sitting for no reason, I got it from a friend who had it sitting outside for 5 years and only ran it a couple times. The reason why is because the tires were so weather cracked my friend wouldn't let my other friend take it out of his driveway till he got the tires fixed, and there it sat for years and years. My uncle who is a motorcycle mechanic and has a PHD from MMI said that it isn't really anything to be worried about, I however don't know if that's true.
________________________________ From: Dennis Hammerl <[email protected]> To: [email protected] Sent: Sunday, August 23, 2009 2:06:11 PM Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner inspection findings. Unless you have a museum, it never does them any good to sit around. I hope there's a good quantity of spare parts for those, looks like a couple are going to be done soon. Yours may not need a chain, the other one I believe will. It sux, but once done, it's the last time. With frequent oil changes, they last and last. It's no secret that I have a love affair with the '83~'86 models. We (dealers) were told the in-line four is a thing of the past back then. The V4 was the "new" kid on the block. We (us) get the last laugh. The Interceptors and Magnas, Sabres and such are almost extinct. The Nighthawk lives on. A superior design. I have an early Sabre ('84 VF1100S) and it's a neat bike but almost no parts anymore and high maintenence makes it a bike to ride very carefully. If the in-line four was obsolete, why did it come back ? Bottom line, I would like to see as many as possible running well. Fix yours. --- On Sun, 8/23/09, Torry Barker <[email protected]> wrote: >From: Torry Barker <[email protected]> >Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner >inspection findings. >To: [email protected] >Date: Sunday, August 23, 2009, 2:52 PM > > >I'm not denying anything, i was just letting you know how many miles it had in >case that might narrow some things down. My bike has been sitting for 5 years >also and only run a couple times in those years. > > > > ________________________________ From: Dennis Hammerl <[email protected]> >To: [email protected] >Sent: Sunday, August 23, 2009 11:24:56 AM >Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam > chain tensioner inspection findings. > > >Yeah so..... >Are you trying to deny it's happening ? In a perfect world nothing ever wears >out, nothing ever breaks. If it makes horrible noises, repair it. The first >issue 650 had tensioner issues. That much is known. I didn't say later ones >don't or can't. The early ones made noise before 3K miles and some never did. >My Buddy Rob's sounded great when he sold it at 38K. There is no rhyme or >reason to some failures. In my world, if it aint broke, don't fix it. BUT, if >it is, do it. I've seen my share of those that people continue to ride while >sounding terrible. When something is making a vile noise, it's usually also >making tiny little metal shavings that will make a > repair even worse someday. OR, break completely.... > >--- On Sun, 8/23/09, Torry Barker <[email protected]> wrote: > > >>From: Torry Barker <[email protected]> >>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner >>inspection findings. >>To: [email protected] >>Date: Sunday, August 23, 2009, 2:42 AM >> >> >>My bike's only got 20k miles on it. >> >> >> >> ________________________________ From: Dennis Hammerl <[email protected]> >>To: [email protected] >>Sent: >> Sunday, August 23, 2009 12:40:02 AM >>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner >>inspection findings. >> >> >>If it doesn't work, fix it. The updated part can fail too. It's certainly >>worth doing. I wouldn't let it go very long in order to minimize the repair. >>When the cam chain starts bashing around, it's not doing it any good. It >>comes with high mileage. Remember, parts are scarce. >> >>--- On Sun, 8/23/09, Torry Barker <[email protected]> wrote: >> >> >>>From: Torry Barker <[email protected]> >>>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner >>>inspection findings. >>>To: [email protected] >>>Date: >>> Sunday, August 23, 2009, 12:56 AM >>> >>> >>>So on my 84 Cb650SC i have the same problem, what do you think that would be? >>> >>> >>> >>> ________________________________ From: Dennis Hammerl <[email protected]> >>>To: [email protected] >>>Sent: Saturday, August 22, 2009 10:33:21 PM >>>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner >>>inspection >>> findings. >>> >>> >>>If you do really understand how it works, then go ahead and turn the >>>crankshaft (by hand, slowly) and watch what happens. There will be a place >>>in rotation (do it many times) where the cam chain will be quite slack. The >>>tension on it changes during rotation. Rotating the crankshaft backwards may >>>show the slack spot more easily. There was an update tensioner for '83 >>>models. All new parts supersede to the update. I would replace with the new >>>part and not attempt a repair of the original. It's a bear of a job but can >>>be done without making a real mess of the motor. Leave the cylinder head on. >>>Unless, of course you're replacing the cam chain too. You have the OEM >>> manual ? Good instructions for removal. The tensioner must be unloaded to >>> be removed. The manual does not address the dynamic of changing tensions >>> during running. The failed tensioner is >>> not controlling the chain during a lightly loaded situation. The spring >>> isn't strong enough to work properly. All these things are cured with the >>> update. >>> >>>--- On Sat, 8/22/09, oldschoolgwin <[email protected]> wrote: >>> >>> >>>>From: oldschoolgwin <[email protected]> >>>>Subject: [Nighthawk Lovers] NH650 - Automatic cam chain tensioner >>>>inspection findings. >>>>To: "Nighthawk Motorcycle Lovers!" <[email protected]> >>>>Date: Saturday, August 22, 2009, 8:35 PM >>>> >>>> >>>> >>>>Hi All, >>>> >>>>Well my 83 650 with 43K miles is rattling like a paint can at 2800 to >>>>3300 rpm so it's time to deal with the automatic cam chain tensioner >>>>(or lack there of). >>>> >>>>I've studied all that the Honda OEM manual has to offer on this >>>>mechanism - so I know the pricipals by which it works but >>>> not any >>>>inspection criteria. >>>> >>>>I pulled the valve cover and this what i find: >>>> >>>>1) No marks on the valve cover chain guard. >>>>2) The cam chain was taught between the cam gears - I could push it >>>>1/8" (total range of motion) when applying ~ 5 lbs downward and upward >>>>to the chain in between the gears, and the chain would retain whatever >>>>tension it had. >>>>3) I pushed on the chain (same as in (3) above) with about 20 lbs and >>>>then it went slack with about 1/4" total range of motion up and down. >>>>I turned the engine 1/4 crank or so with the back wheel and the chain >>>>went back to the original tension as in (2) >>>>4) The spring is connected to the mechanism (taught) >>>> >>>>That's about all I've observed at this stage. >>>> >>>>My question is: I >>>>Is there a definate way to diagnose the health of the tensioning >>>>system? >>>>Would the chain behaviour in (2) and (3) above be expected for a >>>>tensioner in good shape? >>>>Is there >>>> anything else i should inspect now before removal of the >>>>cams) >>>>How should a healthy tensioner behave during inspection? >>>> >>>>I was actually hoping I would find the tensioner arm magically >>>>"unstick" if i wiggled it but that may be a bit of a optimistic dream >>>>- right! >>>> >>>>Thanks for any suggestions you have. >>>> >>>>Paul >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >> >> >> >> >> >> > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
