I'll just say this, I never said he knows more than you, I never said I liked 
the rattle, I never said I don't care about my bike. I am just giving you 
information so YOU can HELP me, I am not rejecting your advice I am trying to 
figure out what exactly it is so I can fix it. That's the thing about emails 
and posts is that nobody can tell if your angry or thankful or rejecting 
information.




________________________________
From: Dennis Hammerl <[email protected]>
To: [email protected]
Sent: Sunday, August 23, 2009 3:27:34 PM
Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner 
inspection findings.


Maybe some folks like the sound of a can with rocks in it. I don't. 
But then, I don't like rap either. 
I'm really getting tired of this. Why don't you all ride your bikes at 10,000+ 
till they pop. Then part them out to those who care. I can help them. 
#BTW.. I have 42 years with Honda... sorry, no PHD 

--- On Sun, 8/23/09, Torry Barker <[email protected]> wrote:


>From: Torry Barker <[email protected]>
>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner 
>inspection findings.
>To: [email protected]
>Date: Sunday, August 23, 2009, 4:17 PM
>
>
>I didn't have my bike sitting for no reason, I got it from a friend who had it 
>sitting outside for 5 years and only ran it a couple times. The reason why is 
>because the tires were so weather cracked my friend wouldn't let my other 
>friend take it out of his driveway till he got the tires fixed, and there it 
>sat for years and years. My uncle who is a motorcycle mechanic and has a PHD 
>from MMI said that it isn't really anything to be worried about, I however 
>don't know if that's true.
>
>
>
>
________________________________
From: Dennis Hammerl
> <[email protected]>
>To: [email protected]
>Sent: Sunday, August 23, 2009 2:06:11 PM
>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner 
>inspection findings.
>
>
>Unless you have a museum, it never does them any good to sit around. I hope 
>there's a good quantity of spare parts for those, looks like a couple are 
>going to be done soon. Yours may not need a chain, the other one I believe 
>will. It sux, but once done, it's the last time. With frequent oil changes, 
>they last and last. It's no secret that I have a love affair with the '83~'86 
>models. We (dealers) were told the in-line four is a thing of the past back 
>then. The V4 was the "new" kid on the block. We (us) get the last laugh. The 
>Interceptors and Magnas, Sabres and such are almost extinct. The Nighthawk 
>lives on. A superior design.
>I have an early Sabre ('84 VF1100S) and
> it's a neat bike but almost no parts anymore and high maintenence makes it a 
> bike to ride very carefully. If the in-line four was obsolete, why did it 
> come back ? 
>Bottom line, I would like
> to see as many as possible running well. Fix yours. 
>
>--- On Sun, 8/23/09, Torry Barker <[email protected]> wrote:
>
>
>>From: Torry Barker <[email protected]>
>>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner 
>>inspection findings.
>>To: [email protected]
>>Date: Sunday, August 23, 2009, 2:52 PM
>>
>>
>>I'm not denying anything, i was just letting you know how many miles it had 
>>in case that might narrow some things down. My bike has been sitting for 5 
>>years also and only run a couple times in those years.
>>
>>
>>
>>
________________________________
From: Dennis Hammerl <[email protected]>
>>To: [email protected]
>>Sent: Sunday, August 23, 2009 11:24:56 AM
>>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam
>> chain tensioner inspection findings.
>>
>>
>>Yeah so.....
>>Are you trying to deny it's happening ? In a perfect world nothing ever wears 
>>out, nothing ever breaks. If it makes horrible noises, repair it. The first 
>>issue 650 had tensioner issues. That much is known. I didn't say later ones 
>>don't or can't. The early ones made noise before 3K miles and some never did. 
>>My Buddy Rob's sounded great when he sold it at 38K. There is no rhyme or 
>>reason to some failures. In my world, if it aint broke, don't fix it. BUT, if 
>>it is, do it. I've seen my share of those that people continue to ride while 
>>sounding terrible. When something is making a vile noise, it's usually also 
>>making tiny little metal shavings that will make a
>> repair even worse someday. OR, break completely....
>>
>>--- On Sun, 8/23/09, Torry Barker <[email protected]> wrote:
>>
>>
>>>From: Torry Barker <[email protected]>
>>>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner 
>>>inspection findings.
>>>To: [email protected]
>>>Date: Sunday, August 23, 2009, 2:42 AM
>>>
>>>
>>>My bike's only got 20k miles on it.
>>>
>>>
>>>
>>>
________________________________
From: Dennis Hammerl <[email protected]>
>>>To: [email protected]
>>>Sent: >>> Sunday, August 23, 2009 12:40:02 AM
>>>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner 
>>>inspection findings.
>>>
>>>
>>>If it doesn't work, fix it. The updated part can fail too. It's certainly 
>>>worth doing. I wouldn't let  it go very long in order to minimize the 
>>>repair. When the cam chain starts bashing around, it's not doing it any 
>>>good. It comes with high mileage. Remember, parts are scarce. 
>>>
>>>--- On Sun, 8/23/09, Torry Barker <[email protected]> wrote:
>>>
>>>
>>>>From: Torry Barker <[email protected]>
>>>>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner 
>>>>inspection findings.
>>>>To: [email protected]
>>>>Date:
>>>> Sunday, August 23, 2009, 12:56 AM
>>>>
>>>>
>>>>So on my 84 Cb650SC i have the same problem, what do you think that would 
>>>>be?
>>>>
>>>>
>>>>
>>>>
________________________________
From: Dennis Hammerl <[email protected]>
>>>>To: [email protected]
>>>>Sent: Saturday, August 22, 2009 10:33:21 PM
>>>>Subject: [Nighthawk Lovers] Re: NH650 - Automatic cam chain tensioner 
>>>>inspection
>>>> findings.
>>>>
>>>>
>>>>If you do really understand how it works, then go ahead and turn the 
>>>>crankshaft (by hand, slowly) and watch what happens. There will be a place 
>>>>in rotation (do it many times) where the cam chain will be quite slack. The 
>>>>tension on it changes during rotation. Rotating the crankshaft backwards 
>>>>may show the slack spot more easily.  There was an update tensioner for '83 
>>>> models. All new parts supersede to the update. I would replace with the 
>>>>new part and not attempt a repair of the original. It's a bear of a job but 
>>>>can be done without making a real mess of the motor. Leave the cylinder 
>>>>head on. Unless, of course you're replacing the cam chain too. You have the 
>>>>OEM
>>>> manual ?  Good instructions for removal. The tensioner must be unloaded to 
>>>> be removed. The manual does not address the dynamic of changing tensions 
>>>> during running. The failed tensioner is
>>>> not controlling the chain during a lightly loaded situation. The spring 
>>>> isn't strong enough to work properly. All these things are cured with the 
>>>> update. 
>>>>
>>>>--- On Sat, 8/22/09, oldschoolgwin <[email protected]> wrote:
>>>>
>>>>
>>>>>From: oldschoolgwin <[email protected]>
>>>>>Subject: [Nighthawk Lovers] NH650 - Automatic cam chain tensioner 
>>>>>inspection findings.
>>>>>To: "Nighthawk Motorcycle Lovers!" <[email protected]>
>>>>>Date: Saturday, August 22, 2009, 8:35 PM
>>>>>
>>>>>
>>>>>
>>>>>Hi All,
>>>>>
>>>>>Well my 83 650 with 43K miles is rattling like a paint can at 2800 to
>>>>>3300 rpm so it's time to deal with the automatic cam chain tensioner
>>>>>(or lack there of).
>>>>>
>>>>>I've studied all that the Honda OEM manual has to offer on this
>>>>>mechanism - so I know the pricipals by which it works but
>>>>> not any
>>>>>inspection criteria.
>>>>>
>>>>>I pulled the valve cover and this what i find:
>>>>>
>>>>>1) No marks on the valve cover chain guard.
>>>>>2) The cam chain was taught between the cam gears - I could push it
>>>>>1/8" (total range of motion) when applying ~ 5 lbs downward and upward
>>>>>to the chain in between the gears, and the chain would retain whatever
>>>>>tension it had.
>>>>>3) I pushed on the chain (same as in (3) above) with about 20 lbs and
>>>>>then it went slack with about 1/4" total range of motion up and down.
>>>>>I turned the engine 1/4 crank or so with the back wheel and the chain
>>>>>went back to the original tension as in (2)
>>>>>4) The spring is connected to the mechanism (taught)
>>>>>
>>>>>That's about all I've observed at this stage.
>>>>>
>>>>>My question is: I
>>>>>Is there a definate way to diagnose the health of the tensioning
>>>>>system?
>>>>>Would the chain behaviour in (2) and (3) above be expected for a
>>>>>tensioner in good shape?
>>>>>Is there
>>>>> anything else i should inspect now before removal of the
>>>>>cams)
>>>>>How should a healthy tensioner behave during inspection?
>>>>>
>>>>>I was actually hoping I would find the tensioner arm magically
>>>>>"unstick" if i wiggled it but that may be a bit of a optimistic dream
>>>>>- right!
>>>>>
>>>>>Thanks for any suggestions you have.
>>>>>
>>>>>Paul
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 
>>>>
>>>>
>>>> 
>>>
>>>
>>>
>>>
>>>
>>> 
>>
>>
>>
>>
>>
>> 
>
>
>
>
>
> 



      
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to