You know - the thought did cross my mind. However - I'm reserving the
Helmet Zip tying for my light saber. Easier to defend myself against
the Sith if I can ride and use my head for defense.
-Obi-Wan Joey
On Tue, Jun 22, 2010 at 10:18 PM, Kyle Munz <kyle...@gmail.com> wrote:
> You could try ziptie-ing it to your helmet.
>
> On 6/22/10, Joey Kelley <sandp...@gmail.com> wrote:
>> Hello All,
>> Well mustering the best in engineering (you might question
>> that after what I'm about to describe) I mustered up a temporary
>> solution to my lack of gauge lights.
>> Went to the hardware store - picked up a pair of LED
>> flashlights ($2.50 /each) and used plastic wire ties (aka cable wraps)
>> to attach each flashlight near the brake fluid reservoir and the left
>> hand side hand grip. A little adjusting later - the right hand one
>> shines on the speedometer, the left hand one shines on the tach, (both
>> cross on the instrument panel) and provide just enough illumination
>> that I can clearly see the gauges and not too much to look like I'm
>> lighting up the sky.
>> DOT approved? Probably not. Workable - yes. Advantage, no
>> tearing apart of perfectly working gauges and wiring - disadvantage
>> battery replacement required and not exactly legal....
>> -Joey (last of the great bike Mechanics. Really.)
>>
>> On Fri, Jun 18, 2010 at 1:37 PM, Joey Kelley <sandp...@gmail.com> wrote:
>>> Everything else is ok - your comment about the two lights makes me
>>> even more curious, the bike appears to have been re-wired since it
>>> left the factory - however - I have never bothered to dig any deeper
>>> than the obvious re-routing of wires to see why or what was done. The
>>> fuses were checked at one point - that might have been 10 years ago
>>> though so I might have missed something. I should take my own advice
>>> and just replace them all on principal.
>>> I'll do that shortly and let everyone know.
>>> Thanks Gene!
>>> -Joey
>>>
>>> On Fri, Jun 18, 2010 at 1:29 PM, Gene Henry <hangh...@new.rr.com> wrote:
>>>> The schematic at
>>>> http://www.bikebandit.com/houseofmotorcycles/1982-honda-motorcycle-cb450sc/o/m14678 shows
>>>> two bulbs in each of the two instrument clusters so I think it unlikely
>>>> they
>>>> have all burned out. More likely a wiring/fuse problem. I have a 84
>>>> CB650SC with an entirely different single instrument cluster so I can't
>>>> help
>>>> much.
>>>>
>>>> Do all the other circuits and light work OK?
>>>>
>>>> Gene
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Nighthawk Motorcycle Lovers!" group.
>> To post to this group, send email to nighthawk_lov...@googlegroups.com.
>> To unsubscribe from this group, send email to
>> nighthawk_lovers+unsubscr...@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>
>>
>
>
> --
>
> -Kyle
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To post to this group, send email to nighthawk_lov...@googlegroups.com.
> To unsubscribe from this group, send email to
> nighthawk_lovers+unsubscr...@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/nighthawk_lovers?hl=en.
>
>
--
-Joey Kelley
Need Computer Technical support?
http://www.crossloop.com/JoeyKelleyComputerServices
At your service - via remote control!
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to nighthawk_lov...@googlegroups.com.
To unsubscribe from this group, send email to
nighthawk_lovers+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/nighthawk_lovers?hl=en.
