Hi Guys I want to put a gas filter on my 1986 Nightgawk 450. Any information that I get will be appreciated. I assume it will go in the line that goes straight down from the shut off valvue to the left hand carb. The line is tight against the carb. So if I cut the line and install the filter. It will stick out like a sore thumb. What kind and shape filter should I put on it. And how should I route the line.? If someone has a picture of how they did theres, That would be great. Also, there is a fitting on the front side of the shut off valvue that has no hose going to it. There is also a fitting on the bottom of the right carb that has no hose going to it. should there be a hose connedting those two fittings.? There is a small hose that is not connected to anything on top. But it just hangs down and out the bottom of the bike.I think that hose should be hooked to the fitting on the valvue. but am not sure of anything. The bike runs fine? As usual you guys have been a great help to someone just getting started. thank you. Fred
-- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To view this discussion on the web visit https://groups.google.com/d/msg/nighthawk_lovers/-/j2IZ4-A6nUIJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
