Tommy's way is better. Trying to work them out I have had them snap off flush with the master cylinder and then your stuck drilling and tapping. if you just drill off the head you will have about a 1/4 inch stud you can grab with some vice grips. The screws are standard M3 (i think) countersunk screws so ACE hardware sells them.
On Sat, Oct 10, 2015 at 12:53 PM, Tommy Hill <ominbo...@gmail.com> wrote: > Oops. Not 8, you only need 4. I paid about $1 each. Let me know if you > want 4. I have also used local hardware store Allen bolts, but I prefer the > stock clean look. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to nighthawk_lovers+unsubscr...@googlegroups.com. > To post to this group, send email to nighthawk_lovers@googlegroups.com. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email to nighthawk_lovers@googlegroups.com. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
