Have you looked into 7.91? It's been out for almost 2 months now...
From: Ziots, Edward [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 08, 2008 7:42 AM To: NT System Admin Issues Subject: RE: HP DL380 G5 and Win2k3 R2 Standard not showing maximum memory in OS I don't want to put V7.90CD firmware since I know it has issues with the NIC's ( SPAQ 7.90 blew up teaming before to the point I had to rebuild a whole OS) this is a production system. I am at V7.80 Firmware right now. Z ________________________________ From: Tom Strader [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 08, 2008 9:30 AM To: NT System Admin Issues Subject: RE: HP DL380 G5 and Win2k3 R2 Standard not showing maximum memory in OS "Z", did you check HP site for the latest Firmware CD and run that? ________________________________ From: Ziots, Edward [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 08, 2008 8:04 AM To: NT System Admin Issues Subject: HP DL380 G5 and Win2k3 R2 Standard not showing maximum memory in OS Importance: High To the list, and those using HP DL380 G5s. Ran into a strange one this morning. I have a pair of DL380 G5's that I was adding 2 GB of memory to ( Have to add it in Pairs as I found out) and when I got the OS to finally Boot ( DIMM 1A,3A must match with DIMM 5A, 7A for the correct Advanced ECC configuration) the BIOS shows 4096MB of memory on the boot, ( BIOS 4/6/2007), but when I log into Windows I only see about 3.4GB. Checked the boot.ini ( there is no /3GB switch or /Maxmem statements) Any ideas has anyone seen this before? Z ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
