Charles Lepple wrote > It should have also said "install libtool" as well. What instructions > should we be updating?
Right. That did it. Unfortunately the trunk has exactly same problem as 2.2.2, it is truncating the returned string at the 15th byte, which is an 0D hex. On the plus side, the debugging info is a little better out of the box, I didn't have to put in any of my own debug printf's. Here's part of it: % drivers/megatec_usb -a MarusonTop -DDDDDD (snip) Asking for UPS status [Q1]... none (-110) ok get_data_phoenix: got so far [(114.6 1] get_data_phoenix: (8 bytes) => 28 31 31 34 2e 36 20 31 ok 4]t_data_phoenix: got so far [(114.6 1001000 get_data_phoenix: (16 bytes) => 28 31 31 34 2e 36 20 31 30 30 31 30 30 30 0d 34 ok 4.6 033 6]hoenix: got so far [(114.6 1001000 get_data_phoenix: (24 bytes) => 28 31 31 34 2e 36 20 31 30 30 31 30 30 30 0d 34 2e 36 20 30 33 33 20 36 ok 4.6 033 60.0 54.0]got so far [(114.6 1001000 get_data_phoenix: (32 bytes) => 28 31 31 34 2e 36 20 31 30 30 31 30 30 30 0d 34 2e 36 20 30 33 33 20 36 30 2e 30 20 35 34 2e 30 ok 4.6 033 60.0 54.0 51.1 00]ar [(114.6 1001000 get_data_phoenix: (40 bytes) => 28 31 31 34 2e 36 20 31 30 30 31 30 30 30 0d 34 2e 36 20 30 33 33 20 36 30 2e 30 20 35 34 2e 30 20 35 31 2e 31 20 30 30 ok 4]6 033 60.0 54.0 51.1 00001000114.6 1001000 get_data_phoenix: (48 bytes) => 28 31 31 34 2e 36 20 31 30 30 31 30 30 30 0d 34 2e 36 20 30 33 33 20 36 30 2e 30 20 35 34 2e 30 20 35 31 2e 31 20 30 30 30 30 31 30 30 30 0d 34 ok 4.6 033 6].0 54.0 51.1 00001000114.6 1001000 get_data_phoenix: (56 bytes) => 28 31 31 34 2e 36 20 31 30 30 31 30 30 30 0d 34 2e 36 20 30 33 33 20 36 30 2e 30 20 35 34 2e 30 20 35 31 2e 31 20 30 30 30 30 31 30 30 30 0d 34 2e 36 20 30 33 33 20 36 ok 4.6 033 60.0 54.0]51.1 00001000114.6 1001000 get_data_phoenix: (64 bytes) => 28 31 31 34 2e 36 20 31 30 30 31 30 30 30 0d 34 2e 36 20 30 33 33 20 36 30 2e 30 20 35 34 2e 30 20 35 31 2e 31 20 30 30 30 30 31 30 30 30 0d 34 2e 36 20 30 33 33 20 36 30 2e 30 20 35 34 2e 30 none (-110) Q1 => FAILED [short read] Q1 detail: (14 bytes) => 28 31 31 34 2e 36 20 31 30 30 31 30 30 30 5 out of 5 detection attempts failed (minimum failures: 2). Megatec protocol UPS not detected. Network UPS Tools 2.3.0 - Megatec protocol driver 1.5.14 [megatec_usb] Carlos Rodrigues (c) 2003-2008 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007 Thanks, David Mathog [EMAIL PROTECTED] Manager, Sequence Analysis Facility, Biology Division, Caltech _______________________________________________ Nut-upsdev mailing list Nut-upsdev@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev