Dne 19. 08. 22 v 12:49 Pavel Hofman napsal(a):
Hi,
I am trying to configure the shutdown threshold for Fortron UPS Champs.
upsc reports:
Init SSL without certificate database
battery.charge: 100
battery.voltage: 55.20
battery.voltage.high: 52.00
battery.voltage.low: 41.60
battery.voltage.nominal: 48.0
device.mfr:
device.model: WPHVT2K0
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/hidraw2
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.internal: 0.12
input.current.nominal: 8.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 234.5
input.voltage.fault: 234.5
input.voltage.nominal: 230
output.voltage: 229.7
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: 01060.07
ups.load: 46
ups.mfr:
ups.model: WPHVT2K0
ups.productid: 5161
ups.status: OL
ups.temperature: 26.3
ups.type: online
ups.vendorid: 0665
Please note there is no battery.charge.low, the battery.charge is
provided by the blazer_usb driver
https://networkupstools.org/docs/man/blazer_usb.html#_notes_for_the_previous_user_of_megatec_drivers
I tried to configure override.battery.charge.low for the device in
ups.conf (after ignorelb), nothing reported in upsc.
I do not need any times, just being able to set charge level or voltage
level at which NUTS will issue the shutdown command to my servers
connected to the UPS a communicating with the nuts-server (their
shutdown takes a while). I could not find any info how to do that apart
of
https://github.com/networkupstools/nut/issues/561#issuecomment-398791357
which did not work for me (no battery.charge.low info appeared in upcs
after this setting and reloading all nuts-related daemons (server,
client, monitor), nothing found in the logs.
Thank you very much for any help or hints.
I tried to increase debug_min = 10 in non-driver/global section of
ups.conf and no extra logs appeared in /var/log/syslog. Neither did with
debug_min = 0 or 1, no effect. I do not know if the number should be
high or low, could not find it in any docs online.
Thanks a lot,
Pavel.
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
