> > Network UPS Tools - UPS driver controller 2.0.4 > > Network UPS Tools (version 2.0.4) - APC Smart protocol driver > > Driver version 1.99.8, command table version 2.0 > > Unable to detect an APC Smart protocol UPS on port /dev/ttyS0 > > Check the cabling, port name or model name and try again > > Driver failed to start (exit status=1)
Had you previously connected the UPS by USB? If so, you'll have to completely power-cycle it before it'll speak to the serial port again. Pull the input power and press-and-hold the off button until the unit gives a click, and then wait a while... -- Dr George D M Ross, School of Informatics, University of Edinburgh Kings Buildings, Mayfield Road, Edinburgh, Scotland, EH9 3JZ Mail: [EMAIL PROTECTED] Voice: +44 131 650 5147 Fax: +44 131 667 7209 PGP: 1024D/AD758CC5 B91E D430 1E0D 5883 EF6A 426C B676 5C2B AD75 8CC5
pgpCy7B1FEBMo.pgp
Description: PGP signature
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser