Since you've brought this up, it's something I'm not sure I understand
properly. The physical machine behind your virtual server only has one or
two serial ports, right? How do you get it talking to so many UPSs? My
understanding at the moment is I have two choices:
1: Physically connect each UPS to one (different) server, and have that
server do the monitoring and management for that UPS.
2: Physically connect each UPS to one (different) server, and have one
central server do the monitoring and management for all UPSs.
Clearly it may be possible to physically connect two UPSs to a given
server with two serial ports, but that's beside the point. Our UPSs for
the most part don't have network support.
Greg.
Actually I don't even use the port on the hardware. I used a product by
Lavalink (there are many on the market, cheapest I could find at the time)
that is a serial to Ethernet converter. There is a driver that loads on
Linux and provides virtual serial ports that talk to the converters. The
nice thing is that the converter can be anywhere in the world. I have them
all over the campus to monitor the UPS units in the network closets as well
as on all the units that supply the servers. Down side is cost, about $100
each. But still cheaper than the network interfaces and really good for
units that can only do serial. The multi port units give more bang for the
buck. They also make a dual and quad port model. Other manufactures make 16
and 32 port units.
The catch is that server doing the monitoring needs to be the last machine
down and the first up.
If you have servers => the number of ups units and all are able to run Nut
you can have each ups plugged into a server and yet that server is plugged
into two different UPS units. If you look at:
http://www.networkupstools.org/doc/2.0.1/big-servers.html
you will see the setup where the server can look to two different host to
get the status of the UPS units that it is plugged into. If you have enough
serial ports on machines that can run Nut you can do it as well, IF your run
times and shutdown timing can be managed so that servers can get the
shutdown nicely. The down side is that thing can get real complex if there
are many servers.
Doug
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
