hissing_sid wrote: > Hi, > > I am running an initiator on FC9 64-bit (Linux > 2.6.27.21-78.2.41.fc9.x86_64 #1 SMP) connecting to a NexSan SATA boy > over 1GB ethernet with iSCSI. > > I am running open-iscsi 2.0-870.
Are you using a open-iscsi.org release or fedora iscsi-initiator-utils one? > > When I try to connect I get a conn error (1011) and I am struggling > to know where to go next. The NexSan has no errors. Can someone give > me pointer on where to go next to try and get this working. I have > another machine running FC8 32-bit (Linux 2.6.26.8-57.fc8 #1 SMP) and > that works just fine. > Any help please? > > #iscsiadm -m session > tcp: [1] 10.52.145.121:3260,2 iqn.1999-02.com.nexsan:p1:sataboy: > 028a2347 > > Loading iSCSI transport class v2.0-870. > iscsi: registered transport (tcp) > iscsi: registered transport (iser) > scsi3 : iSCSI Initiator over TCP/IP > connection1:0: detected conn error (1011) > session1: host reset succeeded Looks like maybe the initial inquiry or repport luns that the scsi layer sends is timing out. The iscsi layer probably tries to abort the command and that fails so we try to drop the session (conn error 1011) then re-login. It looks like we log in at the iscsi level ok. I am not sure why this would happen. Let me do some digging. I think this might have come up before, but I did not see it. > connection1:0: detected conn error (1011) > session1: host reset succeeded > scsi 3:0:0:0: Device offlined - not ready after error recovery > > #iscsiadm -m node -T iqn.1999-02.com.nexsan:p1:sataboy:028a2347 -p > 10.52.145.121 > node.name = iqn.1999-02.com.nexsan:p1:sataboy:028a2347 > node.tpgt = 2 > node.startup = automatic > iface.hwaddress = default > iface.iscsi_ifacename = default > iface.net_ifacename = default > iface.transport_name = tcp > iface.initiatorname = <empty> > node.discovery_address = 10.52.145.121 > node.discovery_port = 3260 > node.discovery_type = send_targets > node.session.initial_cmdsn = 0 > node.session.initial_login_retry_max = 4 > node.session.cmds_max = 128 > node.session.queue_depth = 32 > node.session.auth.authmethod = None > node.session.auth.username = <empty> > node.session.auth.password = <empty> > node.session.auth.username_in = <empty> > node.session.auth.password_in = <empty> > node.session.timeo.replacement_timeout = 120 > node.session.err_timeo.abort_timeout = 15 > node.session.err_timeo.lu_reset_timeout = 30 > node.session.err_timeo.host_reset_timeout = 60 > node.session.iscsi.FastAbort = Yes > node.session.iscsi.InitialR2T = No > node.session.iscsi.ImmediateData = Yes > node.session.iscsi.FirstBurstLength = 262144 > node.session.iscsi.MaxBurstLength = 16776192 > node.session.iscsi.DefaultTime2Retain = 0 > node.session.iscsi.DefaultTime2Wait = 2 > node.session.iscsi.MaxConnections = 1 > node.session.iscsi.MaxOutstandingR2T = 1 > node.session.iscsi.ERL = 0 > node.conn[0].address = 10.52.145.121 > node.conn[0].port = 3260 > node.conn[0].startup = manual > node.conn[0].tcp.window_size = 524288 > node.conn[0].tcp.type_of_service = 0 > node.conn[0].timeo.logout_timeout = 15 > node.conn[0].timeo.login_timeout = 15 > node.conn[0].timeo.auth_timeout = 45 > node.conn[0].timeo.noop_out_interval = 10 > node.conn[0].timeo.noop_out_timeout = 15 > node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072 > node.conn[0].iscsi.HeaderDigest = None > node.conn[0].iscsi.DataDigest = None > node.conn[0].iscsi.IFMarker = No > node.conn[0].iscsi.OFMarker = No > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
