All sorted. Definitely running only open-iscsi now. Still broken though
Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) iscsi: registered transport (iser) scsi6 : iSCSI Initiator over TCP/IP connection1:0: detected conn error (1011) session1: host reset succeeded connection1:0: detected conn error (1011) session1: host reset succeeded scsi 6:0:0:0: Device offlined - not ready after error recovery > > On May 8, 5:08 pm, Mike Christie <micha...@cs.wisc.edu> wrote: > > > hissing_sid wrote: > > > Hi, > > > > I am running an initiator on FC9 64-bit (Linux > > > 2.6.27.21-78.2.41.fc9.x86_64 #1 SMP) connecting to a NexSan SATA boy > > > over 1GB ethernet with iSCSI. > > > > I am running open-iscsi 2.0-870. > > > Are you using a open-iscsi.org release or fedora iscsi-initiator-utils one? > > > > When I try to connect I get a conn error (1011) and I am struggling > > > to know where to go next. The NexSan has no errors. Can someone give > > > me pointer on where to go next to try and get this working. I have > > > another machine running FC8 32-bit (Linux 2.6.26.8-57.fc8 #1 SMP) and > > > that works just fine. > > > Any help please? > > > > #iscsiadm -m session > > > tcp: [1] 10.52.145.121:3260,2 iqn.1999-02.com.nexsan:p1:sataboy: > > > 028a2347 > > > > Loading iSCSI transport class v2.0-870. > > > iscsi: registered transport (tcp) > > > iscsi: registered transport (iser) > > > scsi3 : iSCSI Initiator over TCP/IP > > > connection1:0: detected conn error (1011) > > > session1: host reset succeeded > > > Looks like maybe the initial inquiry or repport luns that the scsi layer > > sends is timing out. The iscsi layer probably tries to abort the command > > and that fails so we try to drop the session (conn error 1011) then > > re-login. It looks like we log in at the iscsi level ok. > > > I am not sure why this would happen. Let me do some digging. I think > > this might have come up before, but I did not see it. > > > > connection1:0: detected conn error (1011) > > > session1: host reset succeeded > > > scsi 3:0:0:0: Device offlined - not ready after error recovery > > > > #iscsiadm -m node -T iqn.1999-02.com.nexsan:p1:sataboy:028a2347 -p > > > 10.52.145.121 > > > node.name = iqn.1999-02.com.nexsan:p1:sataboy:028a2347 > > > node.tpgt = 2 > > > node.startup = automatic > > > iface.hwaddress = default > > > iface.iscsi_ifacename = default > > > iface.net_ifacename = default > > > iface.transport_name = tcp > > > iface.initiatorname = <empty> > > > node.discovery_address = 10.52.145.121 > > > node.discovery_port = 3260 > > > node.discovery_type = send_targets > > > node.session.initial_cmdsn = 0 > > > node.session.initial_login_retry_max = 4 > > > node.session.cmds_max = 128 > > > node.session.queue_depth = 32 > > > node.session.auth.authmethod = None > > > node.session.auth.username = <empty> > > > node.session.auth.password = <empty> > > > node.session.auth.username_in = <empty> > > > node.session.auth.password_in = <empty> > > > node.session.timeo.replacement_timeout = 120 > > > node.session.err_timeo.abort_timeout = 15 > > > node.session.err_timeo.lu_reset_timeout = 30 > > > node.session.err_timeo.host_reset_timeout = 60 > > > node.session.iscsi.FastAbort = Yes > > > node.session.iscsi.InitialR2T = No > > > node.session.iscsi.ImmediateData = Yes > > > node.session.iscsi.FirstBurstLength = 262144 > > > node.session.iscsi.MaxBurstLength = 16776192 > > > node.session.iscsi.DefaultTime2Retain = 0 > > > node.session.iscsi.DefaultTime2Wait = 2 > > > node.session.iscsi.MaxConnections = 1 > > > node.session.iscsi.MaxOutstandingR2T = 1 > > > node.session.iscsi.ERL = 0 > > > node.conn[0].address = 10.52.145.121 > > > node.conn[0].port = 3260 > > > node.conn[0].startup = manual > > > node.conn[0].tcp.window_size = 524288 > > > node.conn[0].tcp.type_of_service = 0 > > > node.conn[0].timeo.logout_timeout = 15 > > > node.conn[0].timeo.login_timeout = 15 > > > node.conn[0].timeo.auth_timeout = 45 > > > node.conn[0].timeo.noop_out_interval = 10 > > > node.conn[0].timeo.noop_out_timeout = 15 > > > node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072 > > > node.conn[0].iscsi.HeaderDigest = None > > > node.conn[0].iscsi.DataDigest = None > > > node.conn[0].iscsi.IFMarker = No > > > node.conn[0].iscsi.OFMarker = No --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---