hissing_sid wrote: > All sorted. Definitely running only open-iscsi now. >
Ok ignore the request to use iscsi-initiator-utils. > Still broken though > > Loading iSCSI transport class v2.0-870. > iscsi: registered transport (tcp) > iscsi: registered transport (iser) > scsi6 : iSCSI Initiator over TCP/IP > connection1:0: detected conn error (1011) > session1: host reset succeeded > connection1:0: detected conn error (1011) > session1: host reset succeeded > scsi 6:0:0:0: Device offlined - not ready after error recovery > Can you get a ethereal/wireshark trace? > > >> On May 8, 5:08 pm, Mike Christie <micha...@cs.wisc.edu> wrote: >> >>> hissing_sid wrote: >>>> Hi, >>>> I am running an initiator on FC9 64-bit (Linux >>>> 2.6.27.21-78.2.41.fc9.x86_64 #1 SMP) connecting to a NexSan SATA boy >>>> over 1GB ethernet with iSCSI. >>>> I am running open-iscsi 2.0-870. >>> Are you using a open-iscsi.org release or fedora iscsi-initiator-utils one? >>>> When I try to connect I get a conn error (1011) and I am struggling >>>> to know where to go next. The NexSan has no errors. Can someone give >>>> me pointer on where to go next to try and get this working. I have >>>> another machine running FC8 32-bit (Linux 2.6.26.8-57.fc8 #1 SMP) and >>>> that works just fine. >>>> Any help please? >>>> #iscsiadm -m session >>>> tcp: [1] 10.52.145.121:3260,2 iqn.1999-02.com.nexsan:p1:sataboy: >>>> 028a2347 >>>> Loading iSCSI transport class v2.0-870. >>>> iscsi: registered transport (tcp) >>>> iscsi: registered transport (iser) >>>> scsi3 : iSCSI Initiator over TCP/IP >>>> connection1:0: detected conn error (1011) >>>> session1: host reset succeeded >>> Looks like maybe the initial inquiry or repport luns that the scsi layer >>> sends is timing out. The iscsi layer probably tries to abort the command >>> and that fails so we try to drop the session (conn error 1011) then >>> re-login. It looks like we log in at the iscsi level ok. >>> I am not sure why this would happen. Let me do some digging. I think >>> this might have come up before, but I did not see it. >>>> connection1:0: detected conn error (1011) >>>> session1: host reset succeeded >>>> scsi 3:0:0:0: Device offlined - not ready after error recovery >>>> #iscsiadm -m node -T iqn.1999-02.com.nexsan:p1:sataboy:028a2347 -p >>>> 10.52.145.121 >>>> node.name = iqn.1999-02.com.nexsan:p1:sataboy:028a2347 >>>> node.tpgt = 2 >>>> node.startup = automatic >>>> iface.hwaddress = default >>>> iface.iscsi_ifacename = default >>>> iface.net_ifacename = default >>>> iface.transport_name = tcp >>>> iface.initiatorname = <empty> >>>> node.discovery_address = 10.52.145.121 >>>> node.discovery_port = 3260 >>>> node.discovery_type = send_targets >>>> node.session.initial_cmdsn = 0 >>>> node.session.initial_login_retry_max = 4 >>>> node.session.cmds_max = 128 >>>> node.session.queue_depth = 32 >>>> node.session.auth.authmethod = None >>>> node.session.auth.username = <empty> >>>> node.session.auth.password = <empty> >>>> node.session.auth.username_in = <empty> >>>> node.session.auth.password_in = <empty> >>>> node.session.timeo.replacement_timeout = 120 >>>> node.session.err_timeo.abort_timeout = 15 >>>> node.session.err_timeo.lu_reset_timeout = 30 >>>> node.session.err_timeo.host_reset_timeout = 60 >>>> node.session.iscsi.FastAbort = Yes >>>> node.session.iscsi.InitialR2T = No >>>> node.session.iscsi.ImmediateData = Yes >>>> node.session.iscsi.FirstBurstLength = 262144 >>>> node.session.iscsi.MaxBurstLength = 16776192 >>>> node.session.iscsi.DefaultTime2Retain = 0 >>>> node.session.iscsi.DefaultTime2Wait = 2 >>>> node.session.iscsi.MaxConnections = 1 >>>> node.session.iscsi.MaxOutstandingR2T = 1 >>>> node.session.iscsi.ERL = 0 >>>> node.conn[0].address = 10.52.145.121 >>>> node.conn[0].port = 3260 >>>> node.conn[0].startup = manual >>>> node.conn[0].tcp.window_size = 524288 >>>> node.conn[0].tcp.type_of_service = 0 >>>> node.conn[0].timeo.logout_timeout = 15 >>>> node.conn[0].timeo.login_timeout = 15 >>>> node.conn[0].timeo.auth_timeout = 45 >>>> node.conn[0].timeo.noop_out_interval = 10 >>>> node.conn[0].timeo.noop_out_timeout = 15 >>>> node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072 >>>> node.conn[0].iscsi.HeaderDigest = None >>>> node.conn[0].iscsi.DataDigest = None >>>> node.conn[0].iscsi.IFMarker = No >>>> node.conn[0].iscsi.OFMarker = No > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
