I have a dump. How should I get it to you?
On May 8, 5:52 pm, Mike Christie <micha...@cs.wisc.edu> wrote:
> hissing_sid wrote:
> > All sorted. Definitely running only open-iscsi now.
>
> Ok ignore the request to use iscsi-initiator-utils.
>
> > Still broken though
>
> > Loading iSCSI transport class v2.0-870.
> > iscsi: registered transport (tcp)
> > iscsi: registered transport (iser)
> > scsi6 : iSCSI Initiator over TCP/IP
> > connection1:0: detected conn error (1011)
> > session1: host reset succeeded
> > connection1:0: detected conn error (1011)
> > session1: host reset succeeded
> > scsi 6:0:0:0: Device offlined - not ready after error recovery
>
> Can you get a ethereal/wireshark trace?
>
>
>
> >> On May 8, 5:08 pm, Mike Christie <micha...@cs.wisc.edu> wrote:
>
> >>> hissing_sid wrote:
> >>>> Hi,
> >>>> I am running an initiator on FC9 64-bit (Linux
> >>>> 2.6.27.21-78.2.41.fc9.x86_64 #1 SMP) connecting to a NexSan SATA boy
> >>>> over 1GB ethernet with iSCSI.
> >>>> I am running open-iscsi 2.0-870.
> >>> Are you using a open-iscsi.org release or fedora iscsi-initiator-utils
> >>> one?
> >>>> When I try to connect I get a conn error (1011) and I am struggling
> >>>> to know where to go next. The NexSan has no errors. Can someone give
> >>>> me pointer on where to go next to try and get this working. I have
> >>>> another machine running FC8 32-bit (Linux 2.6.26.8-57.fc8 #1 SMP) and
> >>>> that works just fine.
> >>>> Any help please?
> >>>> #iscsiadm -m session
> >>>> tcp: [1] 10.52.145.121:3260,2 iqn.1999-02.com.nexsan:p1:sataboy:
> >>>> 028a2347
> >>>> Loading iSCSI transport class v2.0-870.
> >>>> iscsi: registered transport (tcp)
> >>>> iscsi: registered transport (iser)
> >>>> scsi3 : iSCSI Initiator over TCP/IP
> >>>> connection1:0: detected conn error (1011)
> >>>> session1: host reset succeeded
> >>> Looks like maybe the initial inquiry or repport luns that the scsi layer
> >>> sends is timing out. The iscsi layer probably tries to abort the command
> >>> and that fails so we try to drop the session (conn error 1011) then
> >>> re-login. It looks like we log in at the iscsi level ok.
> >>> I am not sure why this would happen. Let me do some digging. I think
> >>> this might have come up before, but I did not see it.
> >>>> connection1:0: detected conn error (1011)
> >>>> session1: host reset succeeded
> >>>> scsi 3:0:0:0: Device offlined - not ready after error recovery
> >>>> #iscsiadm -m node -T iqn.1999-02.com.nexsan:p1:sataboy:028a2347 -p
> >>>> 10.52.145.121
> >>>> node.name = iqn.1999-02.com.nexsan:p1:sataboy:028a2347
> >>>> node.tpgt = 2
> >>>> node.startup = automatic
> >>>> iface.hwaddress = default
> >>>> iface.iscsi_ifacename = default
> >>>> iface.net_ifacename = default
> >>>> iface.transport_name = tcp
> >>>> iface.initiatorname = <empty>
> >>>> node.discovery_address = 10.52.145.121
> >>>> node.discovery_port = 3260
> >>>> node.discovery_type = send_targets
> >>>> node.session.initial_cmdsn = 0
> >>>> node.session.initial_login_retry_max = 4
> >>>> node.session.cmds_max = 128
> >>>> node.session.queue_depth = 32
> >>>> node.session.auth.authmethod = None
> >>>> node.session.auth.username = <empty>
> >>>> node.session.auth.password = <empty>
> >>>> node.session.auth.username_in = <empty>
> >>>> node.session.auth.password_in = <empty>
> >>>> node.session.timeo.replacement_timeout = 120
> >>>> node.session.err_timeo.abort_timeout = 15
> >>>> node.session.err_timeo.lu_reset_timeout = 30
> >>>> node.session.err_timeo.host_reset_timeout = 60
> >>>> node.session.iscsi.FastAbort = Yes
> >>>> node.session.iscsi.InitialR2T = No
> >>>> node.session.iscsi.ImmediateData = Yes
> >>>> node.session.iscsi.FirstBurstLength = 262144
> >>>> node.session.iscsi.MaxBurstLength = 16776192
> >>>> node.session.iscsi.DefaultTime2Retain = 0
> >>>> node.session.iscsi.DefaultTime2Wait = 2
> >>>> node.session.iscsi.MaxConnections = 1
> >>>> node.session.iscsi.MaxOutstandingR2T = 1
> >>>> node.session.iscsi.ERL = 0
> >>>> node.conn[0].address = 10.52.145.121
> >>>> node.conn[0].port = 3260
> >>>> node.conn[0].startup = manual
> >>>> node.conn[0].tcp.window_size = 524288
> >>>> node.conn[0].tcp.type_of_service = 0
> >>>> node.conn[0].timeo.logout_timeout = 15
> >>>> node.conn[0].timeo.login_timeout = 15
> >>>> node.conn[0].timeo.auth_timeout = 45
> >>>> node.conn[0].timeo.noop_out_interval = 10
> >>>> node.conn[0].timeo.noop_out_timeout = 15
> >>>> node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072
> >>>> node.conn[0].iscsi.HeaderDigest = None
> >>>> node.conn[0].iscsi.DataDigest = None
> >>>> node.conn[0].iscsi.IFMarker = No
> >>>> node.conn[0].iscsi.OFMarker = No
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to
open-iscsi+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---
