On 11/26/2013 5:22 PM, Jim Klimov wrote:
On 2013-11-27 02:00, Rainer Heilke wrote:
This is what I would expect with NWAM disabled. But I explicitly do
*not* want to use NWAM.
As a side note, network/physical:default _does_ bring up my secondary
interface e1000g1, which will be used for my two SunRays. e1000g0 is
supposed to be 192.168.0.1, while e1000g1 comes up correctly as
192.168.1.6.
Okay... and what does NOT work ("supposed to" means problems?)
e1000g0 is not brought up with an IP address/netmask on boot-up.
Is e1000g0 configured in the same manner as e1000g1?
Yes. In fact, I backed up my previous network config files, and when the
manual way didn't work, I cp -p 'd the originals into /etc. These files
had been working properly since 151a1.
Are you certain it is named e1000g0 indeed (things do get funny
sometimes)?
I've double-checked this several times (and see above).
I.e. do both NICs show up here?:
# dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
e1000g0 Ethernet up 1000 full e1000g0
e1000g1 Ethernet up 1000 full e1000g1
Yes.
Just in case, does "devfsadm -Cv" reconfigure any device nodes?
No. It actually cleans up some USB and a bunch of dsk and rdsk nodes.
Rainer
//Jim
_______________________________________________
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
--
Mind the Gap
Web: http://www.dragonhearth.com
_______________________________________________
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
