Hallo Holger, as Nexus did explain, he was using NATIVE SSL not RTMPS. Also it does require to change source code and recompile that client.
Our guide will be quite similar to what Nexus has done. Sebastian 2011/10/10 Holger Rabbach (ICT) <holger.rabb...@om.org> > PS: I also tried running red5 RTMPS on port 443 instead of 8443, just to be > sure that's not the problem... > > > > > -----Original Message----- > From: openmeetings-user@googlegroups.com [mailto: > openmeetings-user@googlegroups.com] On Behalf Of Holger Rabbach (ICT) > Sent: Montag, 10. Oktober 2011 15:18 > To: openmeetings-user@googlegroups.com > Subject: RE: [openmeetings-user] Re: RTMPS > > Thanks, but that doesn't seem to work - I added the line, built a new > distribution, installed it, ran the installer, then tried to connect from > the client - doesn't even try port 8443. Emptied the browser cache as well, > to be sure the old app isn't cached. Maybe this doesn't work anymore in > 1.8.4? > > Holger > > > -----Original Message----- > From: openmeetings-user@googlegroups.com [mailto: > openmeetings-user@googlegroups.com] On Behalf Of nexus > Sent: Samstag, 8. Oktober 2011 02:01 > To: OpenMeetings User > Subject: [openmeetings-user] Re: RTMPS > > [...] > > I did a lot of work a while back using RTMPS with Openmeetings and it works > well. Sounds like you have the Red5 side set up. In order to get native SSL > RTMPS to work with Openmeetings you have to checkout and download the source > and add the following bit of code to the following > file: WebContent\openmeetings\base\remote\rtmpConnection.lzx > > this._nc = new NetConnection(); > > // local reference to rtmpconnection > this._nc.t = this; > > this._nc.proxyType = "best"; --This is the line that > you have to add > > After you add this line and build the app using the instructions on the > build page, RTMPS will work. > > In short, this line is necessary to tell the Flash player to try native SSL > first before trying to go through other methods. > > I have successfully used native SSL RTMPS using openmeetings with Windows, > Mac, and Linux clients. It sounds like you have your keystore set up so this > should be all you need. > > I have been able to use the screensharer while using RTMPS but had to hard > code the port in the source to use my RTMP port. So the screensharer has not > been encrypted. I have recently been trying to build an RTMPS screensharer > but have not been sucessful yet. I am looking forward to the guide mentioned > as this should help with this quite a bit. I hope this is helpful. > > -- > You received this message because you are subscribed to the Google Groups > "OpenMeetings User" group. > To post to this group, send email to openmeetings-user@googlegroups.com. > To unsubscribe from this group, send email to > openmeetings-user+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/openmeetings-user?hl=en. > > > OM International Limited - Unit B Clifford Court, Cooper Way - Carlisle > CA3 0JG - United Kingdom > Charity reg no: 1112655 - Company reg no: 5649412 (England and Wales) > > -- > You received this message because you are subscribed to the Google Groups > "OpenMeetings User" group. > To post to this group, send email to openmeetings-user@googlegroups.com. > To unsubscribe from this group, send email to > openmeetings-user+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/openmeetings-user?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "OpenMeetings User" group. > To post to this group, send email to openmeetings-user@googlegroups.com. > To unsubscribe from this group, send email to > openmeetings-user+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/openmeetings-user?hl=en. > > -- Sebastian Wagner http://www.openmeetings.de http://www.webbase-design.de http://www.wagner-sebastian.com seba.wag...@gmail.com -- You received this message because you are subscribed to the Google Groups "OpenMeetings User" group. To post to this group, send email to openmeetings-user@googlegroups.com. To unsubscribe from this group, send email to openmeetings-user+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/openmeetings-user?hl=en.
