Am Freitag 15 Februar 2008 schrieb Josip Rodin:
> On Fri, Feb 15, 2008 at 12:27:46PM +0100, Hendrik Sattler wrote:
> > Am Freitag 15 Februar 2008 schrieb Josip Rodin:
> > > I've got a Sony Ericsson M600i which, in "Phone mode", registers
> > > normally with the OHCI USB bus and the cdc-acm module, which creates
> > > ttyACM{0,1,2}. However, I can't use openobex tools to talk to it, they
> > > just don't see any device. (In the other mode, "File transfer", it
> > > registers as a usb-storage device and I can mount it normally.)
> >
> > What do you want to do with OBEX? Most people just do data transfer, so
> > usb-storage is even better for that. But if you want to do
> > Synchronisation...
>
> I want to be able to get to the phonebook.
>
> > > A search on the web, and in this mailing list's archive mostly found me
> > > nothing concrete, so I'm wondering if this is a genuine problem with
> > > the device, or if there is some setting that can be tuned to make it
> > > talk OBEX.
> >
> > Try obexftp with the /dev/ttyACM0. Maybe obex-over-serial is implemented.
>
> It doesn't work, it just times out three times, and I don't see a way to
> debug that.try using strace -x -s 128 -o m600i.log obexftp -t /dev/ttyACM0 -l You must have read and write permissions on that device! HS ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Openobex-users mailing list [email protected] http://lists.sourceforge.net/lists/listinfo/openobex-users
