Oups, when i answered i did see the wole of the message, for phone
book, have you tryed "Wammu" ?
2008/2/15, Petit Eric <[EMAIL PROTECTED]>:
> 2008/2/15, Hendrik Sattler <[EMAIL PROTECTED]>:
>
> > Am Freitag 15 Februar 2008 schrieb Josip Rodin:
> > > I've got a Sony Ericsson M600i which, in "Phone mode", registers
> normally
> > > with the OHCI USB bus and the cdc-acm module, which creates
> ttyACM{0,1,2}.
> > > However, I can't use openobex tools to talk to it, they just don't see
> any
> > > device. (In the other mode, "File transfer", it registers as a
> usb-storage
> > > device and I can mount it normally.)
> >
> > What do you want to do with OBEX? Most people just do data transfer, so
> > usb-storage is even better for that. But if you want to do
> Synchronisation...
> >
> > > A search on the web, and in this mailing list's archive mostly found me
> > > nothing concrete, so I'm wondering if this is a genuine problem with the
> > > device, or if there is some setting that can be tuned to make it talk
> OBEX.
> >
> > Try obexftp with the /dev/ttyACM0. Maybe obex-over-serial is implemented.
> >
> > HS
> >
>
> My SE K750i have a intern memory of 16 MB and a MCC of 64 MB, with USB
> Cable i only see MCC mounted, to get my files from intern memory with
> USB cable i use either obexftp -u -l or cs-obexftp (from SVN) with USB
> transport.
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Openobex-users mailing list
[email protected]
http://lists.sourceforge.net/lists/listinfo/openobex-users
