2008/2/15, Hendrik Sattler <[EMAIL PROTECTED]>:
> Am Freitag 15 Februar 2008 schrieb Josip Rodin:
> > I've got a Sony Ericsson M600i which, in "Phone mode", registers normally
> > with the OHCI USB bus and the cdc-acm module, which creates ttyACM{0,1,2}.
> > However, I can't use openobex tools to talk to it, they just don't see any
> > device. (In the other mode, "File transfer", it registers as a usb-storage
> > device and I can mount it normally.)
>
> What do you want to do with OBEX? Most people just do data transfer, so
> usb-storage is even better for that. But if you want to do Synchronisation...
>
> > A search on the web, and in this mailing list's archive mostly found me
> > nothing concrete, so I'm wondering if this is a genuine problem with the
> > device, or if there is some setting that can be tuned to make it talk OBEX.
>
> Try obexftp with the /dev/ttyACM0. Maybe obex-over-serial is implemented.
>
> HS
>
My SE K750i have a intern memory of 16 MB and a MCC of 64 MB, with USB
Cable i only see MCC mounted, to get my files from intern memory with
USB cable i use either obexftp -u -l or cs-obexftp (from SVN) with USB
transport.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Openobex-users mailing list
[email protected]
http://lists.sourceforge.net/lists/listinfo/openobex-users
