On 22.03.2012 08:58, salvador wrote: > Can you try the old version openocd 0.5, but with the new pic32mx.c ? > Perhaps there are changes related to your usb probe in the development > version. > Not sure if you have to dig with the configuration.
Salvador, I'll do that. And, I'll try other debuggers. I have as well a vintage original parallel port Wiggler, but also a XDS100v2, and a homemade FT2232H based dongle. I was just too lazy to solder another connector to my PIC32 board, as the current dongle (PicoTAP) uses 10 pin, the XDS100 14, and the FT2232H dongle 20. Also my current computers don't have parallel ports anymore, so I'll have to revive an old one. How exactly did you connect the wiggler to the PIC32? To what is mclr connected? To check again, the chip I have is a PIC32MX220F032B, CPUTAPID 0x40916053 I also have other PIC32 boards, homemade and professional, but none has a JTAG connector. I'd have to add them. Chips are MX360, MX460, MX795. BTW: Did anybody ever test an Altera USB Blaster clone with PIC32? Thanks -- Uhrheber ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
