Hi,
based on my previous email thread [1], I switched to the jtag in the
subject. I was wondering if anyone had a clue about this failure before I
start digging into the details, and perhaps even into the openocd code:
>>>>>>
User : 444 213 arm926ejs.c:534 arm926ejs_arch_state(): MMU: enabled,
D-Cache: enabled, I-Cache: disabled
Debug: 445 213 command.c:145 script_debug(): command - ocd_command
ocd_command type ocd_mww 0x68000010 0x00a00505
Debug: 446 213 command.c:145 script_debug(): command - mww ocd_mww
0x68000010 0x00a00505
Debug: 448 215 target.c:1683 target_write_buffer(): writing buffer of
4 byte at 0x68000010
Debug: 449 233 arm7_9_common.c:2107 arm7_9_read_memory(): address:
0xc70f9a00, size: 0x00000004, count: 0x00000001
Debug: 450 239 armv4_5_mmu.c:47 armv4_5_mmu_translate_va(): 1st lvl
desc: 00000000
Error: 451 239 armv4_5_mmu.c:50 armv4_5_mmu_translate_va(): Address
translation failure
Debug: 452 239 command.c:631 run_command(): Command failed with error code -309
<<<<<<
Many thanks,
Laszlo
[1] http://comments.gmane.org/gmane.comp.debugging.openocd.devel/23429
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
