Is the following output expected?
>>>>>>
sudo openocd -f interface/xds100v2.cfg -f target/omapl138.cfg -c
"reset_config trst_and_srst; init; reset halt"
Open On-Chip Debugger 0.7.0 (2013-05-05-22:01)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
RCLK - adaptive
fast memory access is enabled
dcc downloads are enabled
force hard breakpoints
use of EmbeddedICE dbgrq instead of breakpoint for target halt enabled
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
connect_deassert_srst
Info : max TCK change to: 30000 kHz
Info : RCLK (adaptive clock speed)
Info : JTAG tap: omapl138.jrc tap/device found: 0x1b7d102f (mfg: 0x017,
part: 0xb7d1, ver: 0x1)
Info : JTAG tap: omapl138.etb enabled
Info : JTAG tap: omapl138.arm enabled
Info : Embedded ICE version 6
Info : omapl138.arm: hardware has 2 breakpoint/watchpoint units
Info : ETM v1.3
RCLK - adaptive
Info : JTAG tap: omapl138.jrc tap/device found: 0x1b7d102f (mfg: 0x017,
part: 0xb7d1, ver: 0x1)
Info : JTAG tap: omapl138.etb enabled
Info : JTAG tap: omapl138.arm enabled
target state: halted
target halted in ARM state due to debug-request, current mode: User
cpsr: 0x20000010 pc: 0x427ea2f0
MMU: enabled, D-Cache: enabled, I-Cache: enabled
<<<<<<
The problem is that when I am trying to flash u-boot, I am getting the
aforementioned address translation failure...
>>>>>>
User : 651 252 arm926ejs.c:534 arm926ejs_arch_state(): MMU: enabled,
D-Cache: enabled, I-Cache: enabled
Debug: 652 252 command.c:145 script_debug(): command - ocd_command
ocd_command type ocd_sleep 10
Debug: 653 252 command.c:145 script_debug(): command - sleep ocd_sleep 10
Debug: 655 265 command.c:145 script_debug(): command - ocd_command
ocd_command type ocd_flash write_image erase unlock u-boot-build/u-boot.bin
0x60000000
Debug: 656 265 command.c:145 script_debug(): command - ocd_flash ocd_flash
write_image erase unlock u-boot-build/u-boot.bin 0x60000000
User : 658 266 command.c:549 command_print(): auto erase enabled
User : 659 266 command.c:549 command_print(): auto unlock enabled
Debug: 660 266 configuration.c:86 find_file(): found u-boot-build/u-boot.bin
Debug: 661 266 configuration.c:86 find_file(): found u-boot-build/u-boot.bin
Debug: 662 284 arm7_9_common.c:2107 arm7_9_read_memory(): address:
0xc7049800, size: 0x00000004, count: 0x00000001
Debug: 663 290 armv4_5_mmu.c:47 armv4_5_mmu_translate_va(): 1st lvl desc:
00000000
Error: 664 290 armv4_5_mmu.c:50 armv4_5_mmu_translate_va(): Address
translation failure
Error: 665 290 core.c:239 get_flash_bank_by_addr(): auto_probe failed
Debug: 666 290 command.c:631 run_command(): Command failed with error code
-309
<<<<<<
Got a clue?
Many thanks in advance,
Laszlo
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
