OK, this is now solved by using "soft_reset_halt" as the only workaround
without srst connected. I will look into a different type of reset
implemented later, for this omap board.
On Tue, Jul 9, 2013 at 11:21 AM, Laszlo Papp <[email protected]> wrote:
> Is the following output expected?
>
> >>>>>>
> sudo openocd -f interface/xds100v2.cfg -f target/omapl138.cfg -c
> "reset_config trst_and_srst; init; reset halt"
> Open On-Chip Debugger 0.7.0 (2013-05-05-22:01)
> Licensed under GNU GPL v2
> For bug reports, read
> http://openocd.sourceforge.net/doc/doxygen/bugs.html
> Info : only one transport option; autoselect 'jtag'
> RCLK - adaptive
> fast memory access is enabled
> dcc downloads are enabled
> force hard breakpoints
> use of EmbeddedICE dbgrq instead of breakpoint for target halt enabled
> trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
> connect_deassert_srst
> Info : max TCK change to: 30000 kHz
> Info : RCLK (adaptive clock speed)
> Info : JTAG tap: omapl138.jrc tap/device found: 0x1b7d102f (mfg: 0x017,
> part: 0xb7d1, ver: 0x1)
> Info : JTAG tap: omapl138.etb enabled
> Info : JTAG tap: omapl138.arm enabled
> Info : Embedded ICE version 6
> Info : omapl138.arm: hardware has 2 breakpoint/watchpoint units
> Info : ETM v1.3
> RCLK - adaptive
> Info : JTAG tap: omapl138.jrc tap/device found: 0x1b7d102f (mfg: 0x017,
> part: 0xb7d1, ver: 0x1)
> Info : JTAG tap: omapl138.etb enabled
> Info : JTAG tap: omapl138.arm enabled
> target state: halted
> target halted in ARM state due to debug-request, current mode: User
> cpsr: 0x20000010 pc: 0x427ea2f0
> MMU: enabled, D-Cache: enabled, I-Cache: enabled
> <<<<<<
>
> The problem is that when I am trying to flash u-boot, I am getting the
> aforementioned address translation failure...
>
> >>>>>>
> User : 651 252 arm926ejs.c:534 arm926ejs_arch_state(): MMU: enabled,
> D-Cache: enabled, I-Cache: enabled
> Debug: 652 252 command.c:145 script_debug(): command - ocd_command
> ocd_command type ocd_sleep 10
> Debug: 653 252 command.c:145 script_debug(): command - sleep ocd_sleep 10
> Debug: 655 265 command.c:145 script_debug(): command - ocd_command
> ocd_command type ocd_flash write_image erase unlock u-boot-build/u-boot.bin
> 0x60000000
> Debug: 656 265 command.c:145 script_debug(): command - ocd_flash ocd_flash
> write_image erase unlock u-boot-build/u-boot.bin 0x60000000
> User : 658 266 command.c:549 command_print(): auto erase enabled
> User : 659 266 command.c:549 command_print(): auto unlock enabled
> Debug: 660 266 configuration.c:86 find_file(): found
> u-boot-build/u-boot.bin
> Debug: 661 266 configuration.c:86 find_file(): found
> u-boot-build/u-boot.bin
> Debug: 662 284 arm7_9_common.c:2107 arm7_9_read_memory(): address:
> 0xc7049800, size: 0x00000004, count: 0x00000001
> Debug: 663 290 armv4_5_mmu.c:47 armv4_5_mmu_translate_va(): 1st lvl desc:
> 00000000
> Error: 664 290 armv4_5_mmu.c:50 armv4_5_mmu_translate_va(): Address
> translation failure
> Error: 665 290 core.c:239 get_flash_bank_by_addr(): auto_probe failed
> Debug: 666 290 command.c:631 run_command(): Command failed with error code
> -309
> <<<<<<
>
> Got a clue?
>
> Many thanks in advance,
> Laszlo
>
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
