Hi Paul, The hla newtap stuff was a mix-up from my side. Corrected it in the blog. Thanks for pointing it out. I will answer the other questions after a bit of testing.
SevenW On Tue, 24 Mar 2015 13:47:24 +0300, Paul Fertser <fercer...@gmail.com> wrote: > Hi, > > On Tue, Mar 24, 2015 at 11:26:22AM +0100, SevenW wrote: >> For a write up see my blog, section "hard wired reset" >> >> http://www.sevenwatt.com/main/nucleo-stlink-for-lpc8xx-behind-the-scenes/ > > I think this is confusing: > > " > 0.9.0 cfg > > hla newtap $_CHIPNAME cpu -expected-id $_CPUTAPID > target create $_TARGETNAME hla_target -chain-position $_TARGETNAME > " > > It was the old way actually, pre-0.8.0. With the current code > swj_newdap and target create cortex_m should work just fine, out of > the box. If there're any issues with that, please report. ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
