Yes, it is GPL v2+ compatible. Any ideas
On Tue, May 21, 2019 at 10:53 AM Paul Fertser <d...@users.sourceforge.net>
wrote:
> Hi Tim,
>
> On Tue, May 21, 2019 at 04:53:03PM -0000, Tim Smith wrote:
>
> Hi Paul, We wanted to run OpenOCD with in our process preferably by
> linking it
> as a DLL. Is this something possible?
>
> Is your software GPLv2+ compatible?
>
> --
> Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
> mailto:fercerpav@gmail <https://sourceforge.net/u/gmail/>.com
> ------------------------------
>
> * [tickets:#235] <https://sourceforge.net/p/openocd/tickets/235/>
> Communicating with OpenOCD's north bound API's?*
>
> *Status:* new
> *Milestone:* 0.9.0
> *Created:* Wed May 01, 2019 09:12 PM UTC by Tim Smith
> *Last Updated:* Tue May 21, 2019 04:53 PM UTC
> *Owner:* nobody
>
> Hi,
> We have a debugger that supports halt() , step() and go() high level run
> control commands. We wanted to add ARM run control support utilizing
> OpenOCD. Wondering if OpenOCD has north bound API's or pinch points for our
> C++ debugger API to wire into, to make the same halt, go and step commands
> to work seemlessly with ARM processor via OpenOCD?
> ------------------------------
>
> Sent from sourceforge.net because you indicated interest in
> https://sourceforge.net/p/openocd/tickets/235/
>
> To unsubscribe from further messages, please visit
> https://sourceforge.net/auth/subscriptions/
>
---
** [tickets:#235] Communicating with OpenOCD's north bound API's?**
**Status:** new
**Milestone:** 0.9.0
**Created:** Wed May 01, 2019 09:12 PM UTC by Tim Smith
**Last Updated:** Tue May 21, 2019 11:57 PM UTC
**Owner:** nobody
Hi,
We have a debugger that supports halt() , step() and go() high level run
control commands. We wanted to add ARM run control support utilizing OpenOCD.
Wondering if OpenOCD has north bound API's or pinch points for our C++ debugger
API to wire into, to make the same halt, go and step commands to work
seemlessly with ARM processor via OpenOCD?
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel