> openocd -f openocd.cfg -c "program test.bin exit 0x00000000"
> works, that's a start :-)
> but can you still help me with the programmer getting accessible in the IDE?
Then that is an IDE issue and not an OpenOCD issue.
You really need to ask about the IDE issue on the appropriate forum.
---
** [tickets:#258] sudo apt install openocd**
**Status:** new
**Milestone:** 0.9.0
**Labels:** openOCD arduino no port
**Created:** Wed Nov 20, 2019 12:22 PM UTC by Andries Oyens
**Last Updated:** Wed Nov 20, 2019 07:50 PM UTC
**Owner:** Paul Fertser
Dear people,
I used to program with arduino ade SAMD21 boards (as a ArduinoZero) with Atmel
SAM-ICE. Suddenly the Arduino IDE does no see the Atmel SAM-ICE programmer on a
USB port.
typing openocd in terminal finds the programmer and connected board.
What can I do to find the programmer in the Arduino IDE?
kind regards, Andries
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
