On Wed, Nov 20, 2019 at 04:25:56PM -0000, Jonathan McDowell wrote:
> FWIW the Debian package installs the udev rules to
> lib/udev/rules.d/60-openocd.rules, as they are part of the package. However
> they
> do not have the 2141 PID in them, just 03eb/204f, so if it was working before
It should get covered by generic CMSIS-DAP line:
ATTRS{product}=="*CMSIS-DAP*", MODE="660", GROUP="plugdev", TAG+="uaccess"
Or does the new CMSIS-DAP firmwares no long match since they're
called DAPLink for whatever reason now?
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercer...@gmail.com
---
** [tickets:#258] sudo apt install openocd**
**Status:** new
**Milestone:** 0.9.0
**Labels:** openOCD arduino no port
**Created:** Wed Nov 20, 2019 12:22 PM UTC by Andries Oyens
**Last Updated:** Wed Nov 20, 2019 04:30 PM UTC
**Owner:** Paul Fertser
Dear people,
I used to program with arduino ade SAMD21 boards (as a ArduinoZero) with Atmel
SAM-ICE. Suddenly the Arduino IDE does no see the Atmel SAM-ICE programmer on a
USB port.
typing openocd in terminal finds the programmer and connected board.
What can I do to find the programmer in the Arduino IDE?
kind regards, Andries
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel