> > Have you another board to try, Hitex like to externally connect SRST and > TRST. This causes issues with openocd and the str7.
I've checked the schematics and the behavior of the HITEX board. The schematics shows that SRST pulls TRST. I modified the configuration file to: reset_config trst_and_srst and then, in telnet: jtag_reset 0 1 Measuring on the board, I can see only SRST low, while TRST is high. This means that HITEX didn't mount some of the circuitry to pull TRST. Regards, Edgar > I have found with the str7 that even though the core connects these two > together it is not direct. > > I have tested two other vendor's boards that do not do this connection and > get no problems. > > Cheers > Spen > -- Edgar Grimberg System Developer Zylin AS ZY1000 JTAG Debugger http://www.zylin.com/zy1000.html Phone: (+47) 51 63 25 00 _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
