I seem to have not sent this yesteday when I composed it.... > Please notice that the reset is before any other command... Yes, I did see that.
> Debug: ccid_command: sending: 65 00 00 00 00 00 00 00 00 00 > Debug: usb_send: usb send to=x02 > Debug: usb_send: send 65 00 00 00 00 00 00 00 00 00 > Error: usb_bulk failed: Connection timed out I do not see this. Here's what I see with the reset (only -ddd, not -dddd) Debug: ifd_rutoken_register: ifd_rutoken_register() Debug: ifd_open: trying to open c...@usb:/dev/bus/usb/007/003 Debug: in p_ep: skipping descriptor 0x21 Debug: skipped 1 class/vendor specific endpoint descriptors Debug: usb_set_params: called. config xffffffff ifc x00 eps x03/x82 Debug: ccid_open_usb: Accepted 0b97:7772 with features 0x30 and protocols 0x3 events=1 Debug: ccid_activate: called. Debug: ccid_get_eventfd: called. Debug: ifdhandler_run: events active for reader CCID Compatible Debug: ccid_before_command: called. Debug: ifd_usb_capture: usb capture: Command timed out Debug: ccid_command: sending: 65 00 00 00 00 00 00 00 00 00 Debug: ccid_command: received: 81 00 00 00 00 00 00 42 fe 00 Debug: ccid_after_command: called. Debug: ccid_event: called. Debug: ccid_event: status received: 50 02 Debug: ccid_event: slot 0 event result: 00000002 and without Debug: ifd_rutoken_register: ifd_rutoken_register() Debug: ifd_open: trying to open c...@usb:/dev/bus/usb/007/003 Debug: in p_ep: skipping descriptor 0x21 Debug: skipped 1 class/vendor specific endpoint descriptors Debug: usb_set_params: called. config xffffffff ifc x00 eps x03/x82 Debug: ccid_open_usb: Accepted 0b97:7772 with features 0x30 and protocols 0x3 events=1 Debug: ccid_activate: called. Debug: ccid_get_eventfd: called. Debug: ifdhandler_run: events active for reader CCID Compatible Debug: ccid_before_command: called. Debug: ifd_usb_capture: usb capture: Command timed out Debug: ccid_command: sending: 65 00 00 00 00 00 00 00 00 00 Debug: ccid_command: received: 81 00 00 00 00 00 00 42 fe 00 Debug: ccid_after_command: called. I seem to have misplaced most of my ccid readers. I only tested the O2 OZ776 in my laptop and the eutron "pocket" reader _______________________________________________ opensc-devel mailing list opensc-devel@lists.opensc-project.org http://www.opensc-project.org/mailman/listinfo/opensc-devel