Have you tried switching to a varregion? I want to say that you can do this with an existing megaregion config and it
will work (don't quote me). I do suggest doing this if at all possible.
I know there are load oar parameters [1] specifically for loading 256x256 regions into a larger varregion. I don't know
how well they would work for megaregions.
If you're doing something with Kitely then you would have to ask them directly as I hear they have proprietary
megaregion code.
[1] http://opensimulator.org/wiki/Load_Oar
On 16/02/15 23:06, [email protected] wrote:
Thanks for the help, Chris.
I tried rezzing & editing on the regions with ephemeral objects, and rezzed
objects behave as expected, that is, as normal.
I have tried saving & reloading the megaregion oar in question, with no
success. What I mean is, the whole megaregion
saved/loaded as a single oar, but it didn't fix the problem. Also tried it with
'fix-phantom' & backup both before and
after, and even rebooted the server which didn't do the trick either.
This would suggest (as you noted) that 256^2 regions cannot be loaded
individually into a megaregion and still function,
although I think in some of my reading about this issue I had seen where people
were doing just that and having it work
for them (I could be mistaken about this).
Can individual regions be saved from a megaregion as individual oar files?
Guess I need to test that, because at this
point the only solution I can think is to completely rebuild those three
non-root-sims. :|
~!CJ
On 2015-02-16 19:55, Chris wrote:
I'm unsure of how an OAR would react if it was saved from originally a
256x256 region and then loaded to a megaregion but can you rez
anything from inventory and it be edit-able ? You could also try
saving an OAR of the mega region with the stuff on it, then reload
from that OAR, it may or may not help. Beyond that I am unsure :)
On 2/16/2015 12:43 AM, [email protected] wrote:
...and to answer the second part of your question, after disabling megaregions,
the ephemeral objects are once again
corporeal -- that is, the data loads in the build window, and they are no
longer phantom...
On 2015-02-16 19:24, [email protected] wrote:
Actually yes, I did enable megaregions with everything in place BUT
after enabling, I then re-loaded each 256^2 region from individual oar
files, used 'fix-phantoms' and 'backup' in the console, and then saved
the whole megaregion oar. At this point the objects on the
non-root-sim are phantom/ephemeral.
I then loaded other misc. oar files into all four regions of the
megaregion, and then loaded the megaregion oar again just to make sure
the oar file worked. Everything 'looks' like it's there, but only the
objects on the root sim really are there.
Since the phantom/ephemeral issue is persisting at this point, I then
do another 'fix-phantoms' and 'backup', waited a few minutes then
rebooted the server. No change, problem persists.
~!CJ
On 2015-02-16 18:55, Chris wrote:
Did you enable megaregions while you had content on it? As far as I
know this has a tendency to break your content if you enable it with
stuff rezzed out on your regions. What happens if you disable
megaregions?
On 2/15/2015 11:39 PM, [email protected] wrote:
Been having a problem with objects not on my root sim pretty much no longer
existing. Sometimes they look like
they're there, but when selected there is no data in the build window, and the
avatar can pass right through them
like they're phantom. When loading the oar to Kitely, the objects don't even
appear to be there, they're just gone.
I should start by saying that I've been reading through the Kitely forum,
reading through the OS wiki page for
megaregions, followed references to countless blog entries & other forums, and
they're all saying the same thing
-- use 'fix-phantoms', and then typing 'backup'.
I can save & load megaregions locally & the non-root-sim objects will load up
(visually) but in substance there is
nothing there. But again, when I load one of these 'working' megaregions to
Kitely, the objects don't even load
visually.
All I can find is telling me to use 'fix-phantoms' and 'backup' and that should
solve the problem. Unfortunately I
am not finding this to be the case. Is there something I'm doing wrong?
I'm using OS 0.8.0.3.
~!CiderJack
_______________________________________________
Opensim-users mailing list
[email protected]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[email protected]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[email protected]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[email protected]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
--
Justin Clark-Casey (justincc)
OSVW Consulting
http://justincc.org
http://twitter.com/justincc
_______________________________________________
Opensim-users mailing list
[email protected]
http://opensimulator.org/cgi-bin/mailman/listinfo/opensim-users
