Hi Mike, Are you sure the router/SNMP MIB support 64bit counters? What happens if you snmpwalk from the commandline to this router? Thanks Paul
> I'm having an SNMP problem (Opsview 3.7.2). > > I'm monitoring a Cisco router through a full-inspection firewall via > SNMP. It turns out the firewall's protocol enforcement was breaking > getbulk queries and Opsview was falling back to SNMP ver 1 queries > when it didn't get a response to those ver 2c getbulk queries. > > That worked but it meant it was only using Counter32 OIDs which are > overflowing very frequently and causing graph droupouts. > > I fixed the firewall such that getbulk requests now work, but now > Opsview (though it is getting ver 2c getbulk responses) seems to be > stuck using Counter32 OIDs. > > I tried disabling SNMP for this router and then setting it up again > but the graph dropouts continue. > > Is there some way I can force Opsview to start using the Counter64 > OIDs? > > Thanks! > Mike > _______________________________________________ > Opsview-users mailing list > [email protected] > http://lists.opsview.org/lists/listinfo/opsview-users > _______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
