Works fine using snmpwalk
> Hi Mike, > > Are you sure the router/SNMP MIB support 64bit counters? What > happens if > you snmpwalk from the commandline to this router? > Thanks > Paul > > > > I'm having an SNMP problem (Opsview 3.7.2). > > > > I'm monitoring a Cisco router through a full-inspection firewall > via > > SNMP. It turns out the firewall's protocol enforcement was > breaking > > getbulk queries and Opsview was falling back to SNMP ver 1 > queries > > when it didn't get a response to those ver 2c getbulk queries. > > > > That worked but it meant it was only using Counter32 OIDs which > are > > overflowing very frequently and causing graph droupouts. > > > > I fixed the firewall such that getbulk requests now work, but > now > > Opsview (though it is getting ver 2c getbulk responses) seems to > be > > stuck using Counter32 OIDs. > > > > I tried disabling SNMP for this router and then setting it up > again > > but the graph dropouts continue. > > > > Is there some way I can force Opsview to start using the > Counter64 > > OIDs? > > > > Thanks! > > Mike > > _______________________________________________ > > Opsview-users mailing list > > [email protected] > > http://lists.opsview.org/lists/listinfo/opsview-users > > > > > _______________________________________________ > Opsview-users mailing list > [email protected] > http://lists.opsview.org/lists/listinfo/opsview-users _______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
