Sorry, no answer for this. > Works fine using snmpwalk > > > >> Hi Mike, >> >> Are you sure the router/SNMP MIB support 64bit counters? What >> happens if >> you snmpwalk from the commandline to this router? >> Thanks >> Paul >> >> >> > I'm having an SNMP problem (Opsview 3.7.2). >> > >> > I'm monitoring a Cisco router through a full-inspection firewall >> via >> > SNMP. It turns out the firewall's protocol enforcement was >> breaking >> > getbulk queries and Opsview was falling back to SNMP ver 1 >> queries >> > when it didn't get a response to those ver 2c getbulk queries. >> > >> > That worked but it meant it was only using Counter32 OIDs which >> are >> > overflowing very frequently and causing graph droupouts. >> > >> > I fixed the firewall such that getbulk requests now work, but >> now >> > Opsview (though it is getting ver 2c getbulk responses) seems to >> be >> > stuck using Counter32 OIDs. >> > >> > I tried disabling SNMP for this router and then setting it up >> again >> > but the graph dropouts continue. >> > >> > Is there some way I can force Opsview to start using the >> Counter64 >> > OIDs? >> > >> > Thanks! >> > Mike >> > _______________________________________________ >> > Opsview-users mailing list >> > [email protected] >> > http://lists.opsview.org/lists/listinfo/opsview-users >> > >> >> >> _______________________________________________ >> Opsview-users mailing list >> [email protected] >> http://lists.opsview.org/lists/listinfo/opsview-users > > > _______________________________________________ > Opsview-users mailing list > [email protected] > http://lists.opsview.org/lists/listinfo/opsview-users >
_______________________________________________ Opsview-users mailing list [email protected] http://lists.opsview.org/lists/listinfo/opsview-users
