Hello, Everything was done default, no packages were downloaded off of OPD.
Thanks, Mark On Wed, 2005-02-23 at 17:54, Bernard Li wrote: > Hey Mark: > > The problem with Image.pm is not an issue, if you take a look at the > .rej file, you'll noticed that the error is non-code related (just some > string/comments). > > Did you download or install any special packages off OPD? > > Honestly I'm stumped - Dave any ideas? > > Thanks, > > Bernard > > > -----Original Message----- > > From: Mark Hamrick [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, February 23, 2005 14:47 > > To: Bernard Li > > Subject: Re: [Oscar-users] FC2, Step 4 install Failure. > > > > Bernard, > > > > Thanks for looking at this, and sorry for the delay. > > > > I reran the install with FC2 as a workstation install. I > > followed the install procedures. I have attached the > > Image.pm.rej file and the Oscar logs. I compressed the > > install log so it would not be so large. I fixed the network > > issue you mentioned, I had accidently not set the internal > > eth1 interface to come up at boot in the previous install. > > > > I am still getting a weird failure near the start: > > patching file usr/lib/systeminstaller/SystemInstaller/Image.pm > > Hunk #1 succeeded at 1 with fuzz 1. > > Hunk #2 FAILED at 19. > > Hunk #3 FAILED at 31. > > 2 out of 4 hunks FAILED -- saving rejects to file > > usr/lib/systeminstaller/SystemInstaller/Image.pm.rej > > SIS patch for fedora done > > --> Successfully ran server core package post_server_install scripts > > --> Successfully ran OSCAR wizard_prep script Successfully ran > > --> wizard_prep > > > > > > Then, in step 4, the same issue as before: > > --> Returning oscar_clients packages for base: > > Couldn't find file for SISstage. at > > /usr/lib/systeminstaller/SystemInstaller/PackageBest.pm line > > 110 Couldn't find best files. at > > /usr/lib/systeminstaller/SystemInstaller/Package.pm line 181 > > Failed to find files for all packages. at /usr/bin/mksiimage line 164 > > 1: 2005-1-23 16:43:47 [SystemInstaller::Package :: Line 77] > > Expected lines of output: 64.6 > > 2: 2005-1-23 16:43:47 [SystemInstaller::Package :: Line 79] > > Finding package install files. > > 3: 2005-1-23 16:43:47 [SystemInstaller::Package :: Line 180] > > Finding files with module SystemInstaller::Package::Rpm > > 4: 2005-1-23 16:43:47 [SystemInstaller::Package::Rpm :: Line > > 75] Finding best Rpms, this may take a minute. > > 5: 2005-1-23 16:43:47 [main :: Line 165] Unmounting /proc. > > 6: 2005-1-23 16:43:48 [SystemInstaller::Image :: Line 67] > > rmimage oscarimage > > FATAL: Can't remove /var/lib/systemimager/scripts/oscarimage.master! > > > > So, I am thinking these two are related, but I am not sure > > how to debug it. It appears that my problem is with > > SystemInstaller. I did check, the directory > > /var/lib/systemimager/scripts/ does exist. > > > > Thanks, > > Mark > > > > > > Bernard Li wrote: > > > > >>-----Original Message----- > > >>From: Mark Hamrick [mailto:[EMAIL PROTECTED] > > >>Sent: Friday, February 18, 2005 17:06 > > >>To: Bernard Li > > >>Subject: RE: [Oscar-users] FC2, Step 4 install Failure. > > >> > > >>Bernard, > > >> > > >>Thanks for replying. Steps 1 through five where done > > verbatim. The > > >>start_over script was not run. I will look into the > > network settings, > > >>I do not believe that anything special was done. > > >> > > >>Since I am at a Univeristy with a site license for Redhat, > > I am going > > >>to try RHEL 3.0 AS next, so hopefully that will work. Once that is > > >>working, I will try to come back and get > > >>FC2 with Oscar working to diagnose this issue. > > >> > > >>Thanks, > > >>Mark Hamrick > > >> > > >>On Fri, 2005-02-18 at 15:21 -0800, Bernard Li wrote: > > >> > > >> > > >>>Hey Mark: > > >>> > > >>>I'll list the general steps to install OSCAR on FC2, so you > > >>> > > >>> > > >>can tell > > >> > > >> > > >>>me if you did anything out of the ordinary: > > >>> > > >>>1) Install FC2 - choose workstation install > > >>>2) Copy all RPMs from all *4* CDs to /tftpboot/rpm > > >>>3) Download tarball > > >>>4) Extract, ./configure && make install > > >>>5) Run ./install_cluster ethX and follow steps from GUI > > >>> > > >>>Can you list any extra OPD packages you might have downloaded & > > >>>selected for installation? > > >>> > > >>>You might also want to attach the Image.pm.rej file. > > >>> > > >>>The bug I filed only happens if you run the start_over script - > > >>>basically it happens if you try to re-patch an already > > patched file. > > >>> > > >>>Also, do you have some special network settings, this > > >>> > > > > -- > > Mark Hamrick > > System Administrator > > Department of Mathematics > > UNC-Charlotte > > > > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Oscar-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/oscar-users
