Should you want to enable hard power cycling for reboot you could look at
using a WebControl board
http://www.cainetworks.com/products/webcontrol/index.html and a power relay
(<=$50).
If you're only looking at minimal temperature monitoring, this board also
supports limited 1-wire devices (but not owfs) and a Honeywell humidity
monitor so it could replace that function directly. There is an API which
allows for web data capture and control. It also includes an on-board PLC
capability, so you possibly could make the reboot automatic if you lose
connectivity to devices.
One of these is my latest toy, working a project to make sure we always
close the garage door (or have it done for us).
On Mon, Dec 9, 2013 at 4:11 PM, Arne Raaen <arn...@raaen.org> wrote:
> Thanks again, sorry for not stating the problem clearly.
>
> The problem arose (probably) at a brief power failure, i.e. an abrupt
> shutdown followed by restart once power returned.
> (syslog shows the pc restarting just after data capture stopped)
>
>
> Under normal conditions, with owserver running and functioning, it comes
> up nicely after a normal reboot. No problems.
>
> (I think I have seen the same with my home PC, but then physically
> unplugging/replugging the LinkUSBi is of course easy, and solves the
> problem)
>
>
> Arne
>
>
------------------------------------------------------------------------------
Sponsored by Intel(R) XDK
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
