It should work. Are you using a Sony serial cable or your own? The reason I ask it that the Clie hand helds do not have a RS232 line driver. They output TTL logic levels and need a line driver chip to be RS232 compatible. If you can get your SL10 to perform a serial Hotsync, you should be able to talk to it with HyperTerminal. Also double check the port geometry on the PC and Clie (baud, stop bits, parity, etc)
----- Original Message ----- From: "Rangababu, TNV (IndSys)" <[EMAIL PROTECTED]> To: "Palm Developer Forum" <[EMAIL PROTECTED]> Sent: Friday, February 07, 2003 7:24 AM Subject: Serial comm problem in Sony Clie (PEG-SL10). > Hi All, > I have one Sony Clie (PEG-SL10) device with OS 4.1 and also have a > M125 Palm with OS 4.0. Currently, I have an application, which transmits > data over RS-232 (Serial Communication) from Palm to PC. In M125, using my > application I can able to communicate to PC (Whatever be the data I am > sending from my application to PC, I could able to read on HyperTerminal of > PC (Windows 2000)) but Sony Clie (PEG-SL10) does not communicate. Do I need > to do some workaround, If any have any idea, Pl. lemme know. > > Thanks in advance & Regards, > Rangababu TNV. > > > > "THIS E-MAIL MESSAGE ALONG WITH ANY ATTACHMENTS IS INTENDED ONLY FOR THE > ADDRESSEE and may contain confidential and privileged information. > If the reader of this message is not the intended recipient, > you are notified that any dissemination, distribution or copy of this > communication is strictly Prohibited. > If you have received this message by error, please notify us > immediately, return the original mail to the sender and delete the > message from your system." > > > -- > For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
